Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LPC661IMX/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
1,463 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.11V/µs | 350 kHz | - | 0.002 pA | 1 mV | 58µA | - | 4.75 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV2772MDRIC CMOS 2 CIRCUIT 8SOIC |
2,868 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 360 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
LMC6061AIM/NOPBIC OPAMP GP 1 CIRCUIT 8SOIC |
334 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.035V/µs | 100 kHz | - | 0.01 pA | 100 µV | 24µA | 26 mA | 4.5 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TLV2324IPWRIC CMOS 4 CIRCUIT 14TSSOP |
4,953 |
|
Datasheet | LinCMOS™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | - | 0.03V/µs | 85 kHz | - | 0.6 pA | 1.1 mV | 39µA (x4 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TL034CDIC OPAMP JFET 4 CIRCUIT 14SOIC |
485 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | J-FET | 4 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 790 µV | 870µA (x4 Channels) | 40 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
|
TLC2262QDRIC CMOS 2 CIRCUIT 8SOIC |
3,161 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 0.55V/µs | 730 kHz | - | 1 pA | 300 µV | 425µA (x2 Channels) | 50 mA | 4.4 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
TLV2455CNIC OPAMP GP 4 CIRCUIT 16DIP |
3,944 |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x4 Channels) | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
|
TLV2334IDIC OPAMP GP 4 CIRCUIT 14SOIC |
1,241 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.43V/µs | 525 kHz | - | 0.6 pA | 1.1 mV | 210µA (x4 Channels) | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
TLV2455CPWRIC OPAMP GP 4 CIRCUIT 16TSSOP |
6,000 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.11V/µs | 220 kHz | - | 500 pA | 300 µV | 23µA (x4 Channels) | 10 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 16-TSSOP |
|
|
TLV2783CDIC OPAMP GP 2 CIRCUIT 14SOIC |
3,600 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x2 Channels) | 23 mA | 1.8 V | 3.6 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
