Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2775IPWIC CMOS 4 CIRCUIT 16TSSOP |
4,525 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-TSSOP |
|
OPA4364AIDG4IC OPAMP GP 7MHZ RRO 14SOIC |
400 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 4 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 1 mV | 1.1mA (x4 Channels) | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
TLV2774IPWRIC CMOS 4 CIRCUIT 14TSSOP |
3,175 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x4 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
OPA704UA/2K5IC OPAMP GP 1 CIRCUIT 8SOIC |
1,302 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 3V/µs | 3 MHz | - | 1 pA | 160 µV | 160µA | 10 mA | 4 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OPA2743PAIC CMOS 2 CIRCUIT 8DIP |
3,983 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 10V/µs | 7 MHz | - | 1 pA | 1.5 mV | 1.1mA (x2 Channels) | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
TLE2071AQDRG4Q1IC OPAMP JFET 1 CIRCUIT 8SOIC |
2,110 |
|
Datasheet | Excalibur™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 45V/µs | 10 MHz | - | 20 pA | 470 µV | 1.7mA | 48 mA | 4.5 V | 38 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
OPA244NA/250IC OPAMP GP 1 CIRCUIT SOT23-5 |
2,677 |
|
Datasheet | MicroAmplifier™ | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.16V/µs | 430 kHz | - | 10 nA | 700 µV | 50µA | 25 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
TLC081CDGNIC OPAMP GP 1 CIRCUIT 8HVSSOP |
295 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Obsolete | General Purpose | 1 | - | 19V/µs | 10 MHz | - | 2 pA | 390 µV | 1.9mA | 57 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-HVSSOP |
|
|
TLV2432QDIC CMOS 2 CIRCUIT 8SOIC |
4,634 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 0.25V/µs | 550 kHz | - | 1 pA | 300 µV | 100µA (x2 Channels) | 50 mA | 2.7 V | 10 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
OPA2682N/2K5IC BUFFER 2 CIRCUIT 14SOIC |
2,500 |
|
Datasheet | SpeedPlus™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Buffer | 2 | - | 2100V/µs | - | - | 10 µA | 1.3 mV | 6mA (x2 Channels) | 190 mA | 10 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
