Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2341IDIC OPAMP GP 1 CIRCUIT 8SOIC |
2,857 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 1 | - | 3.6V/µs | 1.7 MHz | - | 0.6 pA | 1.1 mV | 675µA | 30 mA | 2 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TL5580AIPIC OPAMP GP 2 CIRCUIT 8DIP |
1,981 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 2 | - | 5V/µs | 12 MHz | - | 100 nA | 300 µV | 6mA | 50 mA | 4 V | 32 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OPA2677IRGVRIC OPAMP CFA 2 CIRCUIT 16VQFN |
1,269 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | - | 2000V/µs | 220 MHz | 250 MHz | 10 µA | 800 µV | 18mA (x2 Channels) | 500 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-VQFN (4x4) |
|
TLV2773CDGSRIC CMOS 2 CIRCUIT 10VSSOP |
2,250 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 10-VSSOP |
|
TLV2773CDRIC CMOS 2 CIRCUIT 14SOIC |
12,455 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 2 | Rail-to-Rail | 10.5V/µs | 5.1 MHz | - | 2 pA | 700 µV | 1mA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
THS4275DGNRIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
2,444 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 1000V/µs | 400 MHz | 1.4 GHz | 6 µA | 5 mV | 22mA | - | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
|
|
TLV2782AIDRIC OPAMP GP 2 CIRCUIT 8SOIC |
2,026 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 5V/µs | 8 MHz | - | 2.5 pA | 250 µV | 650µA (x2 Channels) | 23 mA | 1.8 V | 3.6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV2471CDRIC OPAMP GP 1 CIRCUIT 8SOIC |
3,715 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA | 35 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LF398PSAMPLE AND HOLD CIRCUIT |
4,984 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Sample and Hold | 1 | - | - | - | - | 10 nA | 2 mV | 4.5mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LMP8481ATQDGKRQ1LMP8481-Q1 - AEC-Q100, 76V, BI-D |
4,259 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Current Sense | 1 | - | 1V/µs | 270 kHz | 270 kHz | 6.3 µA | 80 µV | 88µA | - | 4.5 V | 76 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
