Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2471AIPIC OPAMP GP 1 CIRCUIT 8DIP |
4,353 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA | 35 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
TLC084AIPWPIC OPAMP GP 4 CIRCUIT 20HTSSOP |
1,764 |
|
Datasheet | - | 20-PowerTSSOP (0.173", 4.40mm Width) | Bulk | Active | General Purpose | 4 | - | 19V/µs | 10 MHz | - | 3 pA | 390 µV | 1.9mA (x4 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-HTSSOP |
|
LM358AMIC OPAMP GP 2 CIRCUIT 8SOIC |
665 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 2 mV | 1mA | 30 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LMC6492BEMIC CMOS 2 CIRCUIT 8SOIC |
3,508 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Not For New Designs | CMOS | 2 | Differential, Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.15 pA | 110 µV | 1.3mA (x2 Channels) | 30 mA | 2.5 V | 15.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMC7101AIM5IC OPAMP GP 1 CIRCUIT SOT23-5 |
4,004 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.1V/µs | 1.1 MHz | - | 1 pA | 110 µV | 800µA | 50 mA | 2.7 V | 15.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LMC8101TP/NOPBIC OPAMP GP 1 CIRCUIT 8DSBGA |
570 |
|
Datasheet | - | 8-UFBGA | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1.2V/µs | 1.3 MHz | - | 1 pA | 700 µV | 1.1mA | 90 mA | 2.7 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DSBGA |
|
TL33074DWIC OPAMP HI-SLEW 1-SPLY 16-SOIC |
557 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 3 | - | 13V/µs | 4.5 MHz | 200 kHz | 1 pA | 300 µV | 3.5mA (x3 Channels) | 30 mA | 4 V | 44 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
OPA364AIDRIC OPAMP GP 1 CIRCUIT 8SOIC |
3,250 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 5V/µs | 7 MHz | - | 1 pA | 1 mV | 1.1mA | 85 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
TLV2460AIPIC OPAMP GP 1 CIRCUIT 8DIP |
3,216 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 6.4 MHz | - | 1.3 nA | 500 µV | 550µA | 80 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
TLV2444CDRIC CMOS 4 CIRCUIT 14SOIC |
1,101 |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 1.4V/µs | 1.81 MHz | - | 1 pA | 300 µV | 750µA (x4 Channels) | 50 mA | 2.7 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
