Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
THS4215DRBTIC VOLTAGE FEEDBACK 1 CIRC 8SON |
408 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | - | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
TLC2652C-8DIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
1,956 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Zero-Drift | 1 | Single-Ended | 3.1V/µs | 1.9 MHz | - | 4 pA | 0.6 µV | 1.5mA | 50 mA | 3.8 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
THS4541IRUNTIC OPAMP DIFF 1 CIRCUIT 10WQFN |
173 |
|
Datasheet | - | 10-WFQFN | Tape & Reel (TR) | Active | Differential | 1 | Differential, Rail-to-Rail | 1500V/µs | 850 MHz | 620 MHz | 12 µA | 100 µV | 10.1mA | 100 mA | 2.7 V | 5.4 V | -40°C ~ 125°C | - | - | Surface Mount | 10-WQFN (2x2) |
.jpg "INA4290A4IRGVR")
|
INA4290A4IRGVRIC CURR SENSE 4 CIRCUIT 16VQFN |
1,262 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 4 | - | 2V/µs | 1.1 MHz | - | 20 µA | 6 µV | 1.25mA (x4 Channels) | - | 2.7 V | 20 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-VQFN (4x4) |
|
TLC1078IPIC CMOS 2 CIRCUIT 8DIP |
201 |
|
Datasheet | LinCMOS™ | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | - | 0.032V/µs | 110 kHz | - | 1 pA | 180 µV | 29µA (x2 Channels) | 30 mA | 3 V | 16 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
INA1620RTWTIC AUDIO 2 CIRCUIT 24WQFN |
187 |
|
Datasheet | - | 24-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Audio | 2 | - | 10V/µs | 32 MHz | - | 1.2 µA | 100 µV | 2.6mA (x2 Channels) | 145 mA | 4 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 24-WQFN (4x4) |
|
|
OPA2684IDIC OPAMP CFA 2 CIRCUIT 8SOIC |
176 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | Differential | 780V/µs | 1.9 GHz | 250 MHz | 5 µA | 1.5 mV | 1.7mA (x2 Channels) | 160 mA | 2.8 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LMH6553SDE/NOPBIC OPAMP CFA 1 CIRCUIT 8WSON |
550 |
|
Datasheet | LMH®, PowerWise® | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 1 | Differential | 2300V/µs | - | 900 MHz | 50 µA | - | 29.1mA | 120 mA | 4.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-WSON (3x2.5) |
|
OPA4743EA/250IC CMOS 4 CIRCUIT 14TSSOP |
586 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 10V/µs | 7 MHz | - | 1 pA | 1.5 mV | 1.1mA (x4 Channels) | 20 mA | 3.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
THS4211DGNIC OPAMP VFB 1 CIRCUIT 8HVSSOP |
121 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Bulk | Active | Voltage Feedback | 1 | - | 970V/µs | 350 MHz | 325 MHz | 7 µA | 3 mV | 19mA | 220 mA | 5 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-HVSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
