Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA131UIC OPAMP GP 1 CIRCUIT 8SOIC |
194 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 10V/µs | 4 MHz | - | 5 pA | 200 µV | 1.5mA | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
TLC2272AMDREPIC CMOS 2 CIRCUIT 8SOIC |
4,863 |
|
Datasheet | LinCMOS™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LM675T/LF02IC POWER 1 CIRCUIT TO220-5 |
201 |
|
Datasheet | - | TO-220-5 Formed Leads | Tube | Active | Power | 1 | - | 8V/µs | 5.5 MHz | - | 200 nA | 1 mV | 18mA | 3 A | 10 V | 60 V | 0°C ~ 70°C | - | - | Through Hole | TO-220-5 |
|
INA819IDRGTIC INST AMP 1 CIRCUIT 8SON |
585 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.9V/µs | - | 2 MHz | 150 pA | 10 µV | 350µA | 20 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-SON (3x3) |
|
LMV844MT/NOPBIC OPAMP GP 4 CIRCUIT 14TSSOP |
251 |
|
Datasheet | LMV® | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 2.5V/µs | 4.5 MHz | - | 4 pA | 50 µV | 1.03mA (x4 Channels) | 37 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
THS4121CDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
3,544 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 55V/µs | - | 100 MHz | 1.2 pA | 3 mV | 11mA | 100 mA | 3 V | 3.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA2704UAIC CMOS 2 CIRCUIT 8SOIC |
214 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 3V/µs | 3 MHz | - | 1 pA | 160 µV | 160µA (x2 Channels) | 10 mA | 4 V | 12 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
|
TLC4502AIDIC CMOS 2 CIRCUIT 8SOIC |
219 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 2.5V/µs | 4.7 MHz | - | 1 pA | 10 µV | 2.5mA (x2 Channels) | 50 mA | 4 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
THS4141CDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,362 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 450V/µs | 205 MHz | 160 MHz | 5.1 µA | 1 mV | 13.2mA | 85 mA | 4 V | 33 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
OPA4205APWTLOW-POWER LOW-NOISE FOUR-CHANNEL |
209 |
|
Datasheet | e-trim™ | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Push-Pull, Rail-to-Rail | 4V/µs | 3.6 MHz | - | 100 pA | 4 µV | 220µA (x4 Channels) | 25 mA | 4.5 V | 36 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
