Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV369IDCKRIC OPAMP GP 1 CIRCUIT SC70-5 |
1,984 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 10 pA | 400 µV | 800nA | - | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
INA213AIRSWRIC CURR SENSE 1 CIRCUIT 10UQFN |
8,185 |
|
Datasheet | Zero-Drift | 10-UFQFN | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 80 kHz | - | 28 µA | 5 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 10-UQFN (1.8x1.4) |
|
TL974IPWIC OPAMP GP 4 CIRCUIT 14TSSOP |
8,120 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 5V/µs | 12 MHz | - | 200 nA | 1 mV | 2mA (x4 Channels) | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
TLV9062IPWRIC CMOS 2 CIRCUIT 8TSSOP |
4,966 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6.5V/µs | 10 MHz | - | 0.5 pA | 300 µV | 538µA (x2 Channels) | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-TSSOP |
|
TLV314QDBVTQ1IC CMOS 1 CIRCUIT SOT23-5 |
2,522 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | CMOS | 1 | Rail-to-Rail | 1.5V/µs | 2.7 MHz | - | 1 pA | 750 µV | 150µA | 20 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-5 |
|
|
LMV301MGX/NOPBIC OPAMP GP 1 CIRCUIT SC70-5 |
7,257 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.66V/µs | 1 MHz | - | 0.182 pA | 900 µV | 163µA | 108 mA | 1.8 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
|
TLV316IDCKRIC OPAMP GP 1 CIRCUIT SC70-5 |
6,334 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 6V/µs | 10 MHz | - | 10 pA | 750 µV | 400µA | - | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
LMV341QDCKRQ1IC OPAMP GP 1 CIRCUIT SC70-6 |
1,914 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 1 pA | 250 µV | 107µA | 113 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SC-70-6 |
|
TLV8812DGKTIC OPAMP GP 2 CIRCUIT 8VSSOP |
10,518 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.0015V/µs | 6 kHz | - | 0.1 pA | 75 µV | 425nA (x2 Channels) | 4.7 mA | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TL061ACDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
9,946 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
