Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TL972IDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
4,447 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 5V/µs | 12 MHz | - | 200 nA | 1 mV | 2mA (x2 Channels) | 80 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-VSSOP |
|
TS321IDRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,034 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 0.4V/µs | 800 kHz | - | 20 nA | 500 µV | 600µA | 40 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TLV8801DBVTIC OPAMP GP 1 CIRCUIT SOT23-5 |
4,784 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0015V/µs | 6 kHz | - | 0.1 pA | 550 µV | 450nA | 4.7 mA | 1.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
TL081ACDRIC OPAMP JFET 1 CIRCUIT 8SOIC |
2,405 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 13V/µs | 3 MHz | - | 30 pA | 3 mV | 1.4mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TSV912AIDGKRIC OPAMP GP 2 CIRCUIT 8VSSOP |
3,770 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 4.5V/µs | 8 MHz | 80 kHz | 1 pA | 1.5 mV | 550µA (x2 Channels) | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-VSSOP |
|
OPA1678IDRGRIC AUDIO 2 CIRCUIT 8SON |
1,930 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Audio | 2 | Rail-to-Rail | 9V/µs | 16 MHz | - | 10 pA | 500 µV | 2mA (x2 Channels) | 50 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SON (3x3) |
|
TL032IPIC OPAMP JFET 2 CIRCUIT 8DIP |
404 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 5.1V/µs | 1.1 MHz | - | 2 pA | 570 µV | 434µA (x2 Channels) | 40 mA | 10 V | 30 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
INA214AIRSWRIC CURR SENSE 1 CIRCUIT 10UQFN |
3,040 |
|
Datasheet | Zero-Drift | 10-UFQFN | Tape & Reel (TR) | Active | Current Sense | 1 | Single-Ended | 0.4V/µs | 30 kHz | - | 28 µA | 1 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 10-UQFN (1.8x1.4) |
|
TLV9062SIDGSRIC CMOS 2 CIRCUIT 10VSSOP |
4,721 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 6.5V/µs | 10 MHz | - | 0.5 pA | 300 µV | 538µA (x2 Channels) | 50 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-VSSOP |
|
MC3303NIC OPAMP GP 4 CIRCUIT 14DIP |
1,147 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 0.6V/µs | 1 MHz | - | 200 nA | 2 mV | 2.8mA (x4 Channels) | 30 mA | 5 V | 30 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 14-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
