Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LF412ACNIC OPAMP JFET 2 CIRCUIT 8DIP |
4,943 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 15V/µs | 4 MHz | - | 50 pA | 500 µV | 3.6mA (x2 Channels) | - | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM10CNIC OPAMP GP 1 CIRCUIT 8DIP |
3,748 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | - | - | - | 12 nA | 500 µV | 300µA | 20 mA | 1.1 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LMC660CNIC CMOS 4 CIRCUIT 14DIP |
2,914 |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 1.5mA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
LMC6482AINIC CMOS 2 CIRCUIT 8DIP |
2,327 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.02 pA | 110 µV | 1.3mA (x2 Channels) | 30 mA | 3 V | 15.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LF444CNIC OPAMP JFET 4 CIRCUIT 14DIP |
1,892 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 1V/µs | 1 MHz | - | 10 pA | 3 mV | 600µA (x4 Channels) | 14 mA | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LF412CNIC OPAMP JFET 2 CIRCUIT 8DIP |
1,482 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 15V/µs | 4 MHz | - | 50 pA | 1 mV | 3.6mA (x2 Channels) | - | 10 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LF398NIC SAMPL/HOLD 1 CIRCUIT 8DIP |
4,731 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Sample and Hold | 1 | - | - | - | - | 10 nA | 2 mV | 4.5mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LF411CNIC OPAMP JFET 1 CIRCUIT 8DIP |
2,211 |
|
Datasheet | BI-FET II™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 15V/µs | 4 MHz | - | 50 pA | 800 µV | 1.8mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM318NIC OPAMP GP 1 CIRCUIT 8DIP |
3,861 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 70V/µs | 15 MHz | 15 MHz | 150 nA | 4 mV | 5mA | - | 10 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LF353NIC OPAMP JFET 2 CIRCUIT 8DIP |
3,672 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 4 MHz | - | 50 pA | 5 mV | 3.6mA (x2 Channels) | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
