Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM2904NIC OPAMP GP 2 CIRCUIT 8DIP |
2,467 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | - | 700 kHz | - | 45 nA | 2 mV | 1mA | 30 mA | 3 V | 32 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM301ANIC OPAMP GP 1 CIRCUIT 8DIP |
2,229 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.5V/µs | 1 MHz | - | 70 nA | 2 mV | 1.8mA | 30 mA | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LM4250CNIC OPAMP GP 1 CIRCUIT 8DIP |
2,745 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | - | 250 kHz | - | 75 nA | 6 mV | 100µA | - | 2 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LM6134BINIC OPAMP GP 4 CIRCUIT 14DIP |
2,037 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 14V/µs | 11 MHz | - | 125 nA | 1.7 mV | 390µA (x4 Channels) | 3.5 mA | 1.8 V | 24 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
LM614IWMIC OPAMP GP 4 CIRCUIT 16SOIC |
4,953 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | - | 0.7V/µs | 800 kHz | - | 10 nA | 5 mV | 450µA (x4 Channels) | 25 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
LM6171BINIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
1,653 |
|
Datasheet | VIP™ III | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM6172INIC VOLTAGE FEEDBACK 2 CIRC 8DIP |
4,407 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 2 | - | 3000V/µs | 100 MHz | 160 MHz | 1.2 µA | 400 µV | 4.6mA (x2 Channels) | 90 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LM6181IM-8IC OPAMP CFA 1 CIRCUIT 8SOIC |
4,076 |
|
Datasheet | VIP™ II | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 100 MHz | 5 µA | 3.5 mV | 7.5mA | 130 mA | 7 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
LM6181INIC OPAMP CFA 1 CIRCUIT 8DIP |
2,158 |
|
Datasheet | VIP™ II | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 100 MHz | 5 µA | 3.5 mV | 7.5mA | 130 mA | 7 V | 32 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
LM7171BINIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
1,564 |
|
Datasheet | VIP™ III | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 4100V/µs | 200 MHz | 220 MHz | 2.7 µA | 200 µV | 6.5mA | 118 mA | 5.5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
