Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
L272MIC OPAMP GP 2 CIRCUIT 8MINI DIP |
1,414 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 300 nA | 15 mV | 8mA | 700 mA | 4 V | 28 V | -40°C ~ 85°C | - | - | Through Hole | 8-Mini DIP |
|
TS27L2CPTIC CMOS 2 CIRCUIT 8TSSOP |
1,849 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | - | 0.04V/µs | 100 kHz | - | 1 pA | 1.1 mV | 10µA (x2 Channels) | 45 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-TSSOP |
|
L2720IC OPAMP GP 2 CIRCUIT 16POWERDIP |
3,334 |
|
Datasheet | - | 16-PowerDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 2V/µs | 1.2 MHz | - | 200 nA | 10 mV | 10mA | 1.5 A | 4 V | 28 V | -40°C ~ 85°C | - | - | Through Hole | 16-PowerDIP |
|
|
L272IC OPAMP GP 2 CIRCUIT 16POWERDIP |
4,710 |
|
Datasheet | - | 16-PowerDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 1V/µs | 350 kHz | - | 300 nA | 15 mV | 8mA | 1 A | 4 V | 28 V | -40°C ~ 85°C | - | - | Through Hole | 16-PowerDIP |
|
TS934INIC OPAMP GP 2 CIRCUIT 14DIP |
4,547 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.05V/µs | 100 kHz | - | 1 pA | 10 mV | 20µA (x2 Channels) | 5 mA | 2.7 V | 10 V | -40°C ~ 105°C | Automotive | AEC-Q100 | Through Hole | 14-DIP |
|
TSH95IDTIC OPAMP GP 4 CIRCUIT 16SO |
2,411 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | - | 110V/µs | 150 MHz | - | 5 µA | 4 mV | 4.5mA (x4 Channels) | 40 mA | 7 V | 12 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 16-SO |
|
TSH31IDIC OPAMP GP 1 CIRCUIT 8SOIC |
1,310 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 280 MHz | - | 2 pA | 3 mV | 20mA | 70 mA | 6 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
TS514AIDIC OPAMP GP 4 CIRCUIT 14SO |
3,091 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | - | 1.5V/µs | 3 MHz | - | 50 nA | 500 µV | 500µA | 23 mA | 6 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
TSV6191ILTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,072 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.08V/µs | 450 kHz | - | 1 pA | 4 mV | 10.5µA | 63 mA | 1.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
TS27M2ACDIC CMOS 2 CIRCUIT 8SOIC |
2,043 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 2 | - | 0.6V/µs | 1 MHz | - | 1 pA | 900 µV | 150µA (x2 Channels) | 45 mA | 3 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
