Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TS941AIDTIC OPAMP GP 1 CIRCUIT 8SOIC |
1,789 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.0045V/µs | 10 kHz | - | 1 pA | 5 mV | 1.2µA | 5 mA | 2.5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
TSV622ILTIC OPAMP GP 420KHZ RRO SOT23-8 |
1,210 |
|
Datasheet | - | SOT-23-8 | Cut Tape (CT) | Obsolete | CMOS | 2 | Rail-to-Rail | 0.14V/µs | 420 kHz | - | 1 pA | 4 mV | 29µA | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
|
TS902IDIC OPAMP GP 2 CIRCUIT 14SO |
2,923 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 1.4 MHz | - | 1 pA | 10 mV | 400µA (x2 Channels) | 60 mA | 2.7 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SO |
|
TS912AINIC CMOS 2 CIRCUIT 8MINI DIP |
3,871 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 2 | Rail-to-Rail | 1.3V/µs | 1.4 MHz | - | 1 pA | 5 mV | 400µA (x2 Channels) | 75 mA | 2.7 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | 8-Mini DIP |
|
L2720DIC OPAMP GP 2 CIRCUIT 16SO |
3,981 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | 2V/µs | 1.2 MHz | - | 200 nA | 10 mV | 10mA | 1.5 A | 4 V | 28 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
|
|
TSV632ILTIC OPAMP GP 2 CIRCUIT SOT23-8 |
2,427 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.34V/µs | 880 kHz | - | 1 pA | 3 mV | 50µA (x2 Channels) | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | SOT-23-8 |
|
TL064ACNIC OPAMP JFET 4 CIRCUIT 14DIP |
1,179 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 4 | - | 3.5V/µs | 1 MHz | - | 30 pA | 3 mV | 200µA (x4 Channels) | 20 mA | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-DIP |
|
TSV625AIPTIC CMOS 4 CIRCUIT 16TSSOP |
4,006 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | CMOS | 4 | Rail-to-Rail | 0.14V/µs | 420 kHz | - | 1 pA | 800 µV | 29µA | 74 mA | 1.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-TSSOP |
|
|
TS974IYDIC OPAMP GP 4 CIRCUIT 14SO |
3,324 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 4V/µs | 12 MHz | - | 200 nA | 1 mV | 2mA (x4 Channels) | 100 mA | 2.7 V | 10 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
|
TSH111IDTIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,022 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 450V/µs | - | 100 MHz | 3 µA | 900 µV | 4mA | 47 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
