Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8033AKSZ-R2IC OPAMP VFB 1 CIRCUIT SC70-5 |
4,569 |
|
Datasheet | FastFET™ | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Discontinued at Digi-Key | Voltage Feedback | 1 | Rail-to-Rail | 80V/µs | - | 80 MHz | 1.5 pA | 1 mV | 3.3mA | 60 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
AD8665ARJZ-R2IC OPAMP GP 1 CIRCUIT SOT23-5 |
1,722 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | Rail-to-Rail | 3.5V/µs | 4 MHz | - | 0.2 pA | 600 µV | 1.15mA | 140 mA | 5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
AD8665ARJZ-REELIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,903 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 3.5V/µs | 4 MHz | - | 0.2 pA | 600 µV | 1.15mA | 140 mA | 5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
AD549JHZIC OPAMP GP 1 CIRCUIT TO99-8 |
4,919 |
|
Datasheet | Topgate™ | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 3V/µs | 1 MHz | - | 0.15 pA | 500 µV | 600µA | 20 mA | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
|
AMP03BJZIC OPAMP DIFF 1 CIRCUIT TO99-8 |
1,580 |
|
Datasheet | - | TO-99-8 Metal Can | Tube | Active | Differential | 1 | - | 9.5V/µs | - | 3 MHz | - | 20 µV | 2.5mA | 45 mA | 12 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
ADA4000-1AUJZ-R2IC OPAMP JFET 1 CIRCUIT TSOT23-5 |
3,421 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 1 | - | 20V/µs | 5 MHz | - | 5 pA | 200 µV | 1.35mA | 28 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
OP27GJZIC OPAMP GP 1 CIRCUIT TO99-8 |
1,582 |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 2.8V/µs | 8 MHz | - | 15 nA | 30 µV | - | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
AD8290ACPZ-RLIC CURR SENSE 1 CIRCUIT 16LFCSP |
4,601 |
|
Datasheet | - | 16-UFQFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | 250 Hz | 100 pA | - | 1.2mA | - | 2.6 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP-UQ (3x3) |
|
ADA4000-4ARZ-RLIC OPAMP JFET 4 CIRCUIT 14SOIC |
1,351 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 20V/µs | 5 MHz | - | 5 pA | 200 µV | 1.35mA (x4 Channels) | 28 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
ADA4311-1ARHZ-RLIC OPAMP CFA 2 CIRCUIT 10MSOP |
2,632 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Current Feedback | 2 | Differential | 1050V/µs | - | 310 MHz | 2 µA | 1 mV | 11.8mA | - | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP-EP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
