Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-88565012AIC OPAMP GP 4 CIRCUIT 20CLCC |
4,039 |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 4 | - | 3V/µs | 6 MHz | - | 7 nA | 100 µV | 9mA | - | 9 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD8003ACPZ-REELIC OPAMP CFA 3 CIRCUIT 24LFCSP |
1,038 |
|
Datasheet | - | 24-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | Current Feedback | 3 | - | 3800V/µs | - | 1.65 GHz | 7 µA | 700 µV | 9.5mA (x3 Channels) | 100 mA | 4.5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 24-LFCSP-WQ (4x4) |
|
AD8538ARZ-REELIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
4,499 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Zero-Drift | 1 | - | 0.4V/µs | 430 kHz | - | 15 pA | 5 µV | 150µA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8538AUJZ-R2IC OPAMP ZERO-DRIFT 1 CIRC TSOT5 |
2,380 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Discontinued at Digi-Key | Zero-Drift | 1 | - | 0.4V/µs | 430 kHz | - | 15 pA | 5 µV | 150µA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
AD8538AUJZ-REELIC OPAMP ZERO-DRIFT 1 CIRC TSOT5 |
1,405 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | Zero-Drift | 1 | - | 0.4V/µs | 430 kHz | - | 15 pA | 5 µV | 150µA | 25 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
AD8677AUJZ-R2IC OPAMP GP 1 CIRCUIT TSOT23-5 |
2,884 |
|
Datasheet | iPolar® | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 1 | - | 0.2V/µs | 600 kHz | - | 200 pA | 45 µV | 1.1mA | 15 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
|
AD8677AUJZ-REELIC OPAMP GP 1 CIRCUIT TSOT23-5 |
1,208 |
|
Datasheet | iPolar® | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.2V/µs | 600 kHz | - | 200 pA | 45 µV | 1.1mA | 15 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
AD625CDZIC INST AMP 1 CIRCUIT 16CDIP |
4,760 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 25 MHz | 650 kHz | 10 nA | 10 µV | 3.5mA | - | 12 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
|
AD524CDZIC INST AMP 1 CIRCUIT 16CDIP |
4,880 |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 5V/µs | 1 MHz | 1 MHz | 15 nA | 50 µV | 3.5mA | - | 12 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 16-CDIP |
|
AD8502ARJZ-R2IC CMOS 2 CIRCUIT SOT23-8 |
4,041 |
|
Datasheet | - | SOT-23-8 | Tape & Reel (TR) | Discontinued at Digi-Key | CMOS | 2 | Rail-to-Rail | 0.004V/µs | 7 kHz | - | 1 pA | 500 µV | 750nA (x2 Channels) | 5 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
