Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD215BYIC OPAMP ISOLATION 1 CIRC 12SIP |
1,597 |
|
Datasheet | - | 44-SIP, 12 Leads, Offset Leads | Tube | Obsolete | Isolation | 1 | - | 6V/µs | - | 120 kHz | 300 pA | 400 µV | 40mA | 5 mA | 28.5 V | 34 V | -40°C ~ 85°C | - | - | Through Hole | 12-SIP |
|
HMC750LP4EIC LIMITING 1 CIRCUIT 24SMT |
1,387 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Bulk | Obsolete | Limiting | 1 | Differential | - | - | - | - | 3 mV | 106mA | - | 4.6 V | 5.4 V | -40°C ~ 85°C | - | - | Surface Mount | 24-QFN (4x4) |
|
AD202KYIC OPAMP ISOLATION 2 CIRC 11SIP |
1,145 |
|
Datasheet | - | 38-SIP, 11 Leads, Offset Leads | Tube | Obsolete | Isolation | 2 | - | - | 2 kHz | - | 30 pA | 5 mV | 5mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-SIP |
|
AD202KNIC OPAMP ISOLATION 2 CIRC 11DIP |
4,565 |
|
Datasheet | - | 38-DIP (0.600", 15.24mm), 11 Leads | Tube | Obsolete | Isolation | 2 | - | - | 2 kHz | - | 30 pA | 5 mV | 5mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-PDIP |
|
AD204KNIC OPAMP ISOLATION 2 CIRC 11DIP |
2,392 |
|
Datasheet | - | 38-DIP (0.600", 15.24mm), 11 Leads | Tube | Obsolete | Isolation | 2 | - | - | 5 kHz | - | 30 pA | 5 mV | - | 2 mA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-PDIP |
|
AD621SQ/883BIC INST AMP 1 CIRCUIT 8CERDIP |
1,963 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | - | 800 kHz | 500 pA | 75 µV | 900µA | 18 mA | 4.6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
5962-9211701M2AIC OPAMP GP 2 CIRCUIT 20CLCC |
4,903 |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 2 | - | 300V/µs | 50 MHz | - | 3.3 µA | 300 µV | 10mA | 32 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD210JNIC OPAMP ISOLATION 1 CIRC 12DIP |
2,156 |
|
Datasheet | - | 38-DIP (0.800", 20.32mm), 12 Leads | Tube | Obsolete | Isolation | 1 | - | 1V/µs | - | 20 kHz | 30 pA | 15 mV | 50mA | 5 mA | 14.25 V | 15.75 V | -25°C ~ 85°C | - | - | Through Hole | 12-PDIP |
|
5962-8777101M3AIC OPAMP GP 4 CIRCUIT 28LCC |
2,567 |
|
Datasheet | - | 28-LCC | Tube | Active | General Purpose | 4 | Differential | 0.15V/µs | 500 kHz | - | 750 pA | 40 µV | 600µA (x4 Channels) | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 28-LCC (11.43x11.43) |
|
AD210BNIC OPAMP ISOLATION 1 CIRC 12DIP |
3,837 |
|
Datasheet | - | 38-DIP (0.800", 20.32mm), 12 Leads | Tube | Obsolete | Isolation | 1 | - | 1V/µs | - | 20 kHz | 30 pA | 5 mV | 50mA | 5 mA | 14.25 V | 15.75 V | -25°C ~ 85°C | - | - | Through Hole | 12-PDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
