Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD844BQIC OPAMP CFA 1 CIRCUIT 8CERDIP |
4,319 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Current Feedback | 1 | - | 2000V/µs | - | 60 MHz | 150 pA | 50 µV | 6.5mA | 80 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD602ARZ-RLIC VARIABLE GAIN 2 CIRC 16SOIC |
4,957 |
|
Datasheet | X-AMP® | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
|
AD600ARZ-RLIC VARIABLE GAIN 2 CIRC 16SOIC |
2,449 |
|
Datasheet | X-AMP® | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
AD641APIC LOGARITHMIC 1 CIRCUIT 20PLCC |
4,374 |
|
Datasheet | - | 20-LCC (J-Lead) | Tube | Obsolete | Logarithmic | 1 | - | - | - | 250 MHz | 7 µA | 50 µV | 35mA | 2.3 mA | 9 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 20-PLCC (9x9) |
|
AD521JDZIC INST AMP 1 CIRCUIT 14CDIP |
3,694 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Not For New Designs | Instrumentation | 1 | - | 10V/µs | - | 2 MHz | 80 nA | 3 mV | 5mA | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 14-CDIP |
|
AD215AYIC OPAMP ISOLATION 1 CIRC 12SIP |
1,616 |
|
Datasheet | - | 44-SIP, 12 Leads, Offset Leads | Tube | Obsolete | Isolation | 1 | - | 6V/µs | - | 120 kHz | 300 pA | 400 µV | 40mA | 5 mA | 28.5 V | 34 V | -40°C ~ 85°C | - | - | Through Hole | 12-SIP |
|
AD204JYIC OPAMP ISOLATION 2 CIRC 10SIP |
3,628 |
|
Datasheet | - | 38-SIP, 10 Leads, Offset Leads | Tube | Obsolete | Isolation | 2 | - | - | 5 kHz | - | 30 pA | 15 mV | - | 2 mA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 10-SIP |
|
LT6203XS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
4,294 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 25V/µs | 100 MHz | - | 1.3 µA | 100 µV | 3.3mA (x2 Channels) | 40 mA | 2.5 V | 12.6 V | -40°C ~ 175°C | - | - | Surface Mount | 8-SO |
|
|
AD202JYIC OPAMP ISOLATION 2 CIRC 11SIP |
2,044 |
|
Datasheet | - | 38-SIP, 11 Leads, Offset Leads | Tube | Obsolete | Isolation | 2 | - | - | 2 kHz | - | 30 pA | 15 mV | 5mA | 400 µA | 13.5 V | 16.5 V | -40°C ~ 85°C | - | - | Through Hole | 11-SIP |
|
LT1210XFE#TRPBFIC OPAMP CFA 1 CIRCUIT 16TSSOP |
4,466 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) Exposed Pad | Tape & Reel (TR) | Active | Current Feedback | 1 | - | 900V/µs | - | 35 MHz | - | 3 mV | 35mA | 2 A | 10 V | 30 V | -40°C ~ 175°C | - | - | Surface Mount | 16-TSSOP-EP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
