Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8556ARZ-REEL7IC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
2,457 |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | - | 1.2V/µs | 2 MHz | - | 49 nA | 2 µV | 2mA | 10 mA | 4.5 V | 5.5 V | -40°C ~ 140°C | - | - | Surface Mount | 8-SOIC |
|
ADA4622-4ACPZ-RLIC OPAMP JFET 4 CIRCUIT 16LFCSP |
4,122 |
|
Datasheet | - | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | J-FET | 4 | Rail-to-Rail | 23V/µs | 8 MHz | 15.5 MHz | 2 pA | 40 µV | 715µA (x4 Channels) | 20 mA | 5 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
|
LT1793ACS8#TRPBFIC OPAMP JFET 1 CIRCUIT 8SO |
1,940 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 3.4V/µs | 4.2 MHz | - | 3 pA | 250 µV | 4.2mA | - | 9 V | 40 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LT6375HDF#TRPBFIC OPAMP DIFF 1 CIRCUIT 14DFN |
3,540 |
|
Datasheet | - | 14-WFDFN Exposed Pad, 12 Leads | Tape & Reel (TR) | Active | Differential | 1 | Rail-to-Rail | 2.4V/µs | - | 575 kHz | - | 120 µV | 350µA | 28 mA | 3 V | 50 V | -40°C ~ 125°C | - | - | Surface Mount | 14-DFN (4x4) |
|
LT1817CS#PBFIC VOLTAGE FEEDBACK 4 CIRC 14SO |
3,909 |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 4 | - | 1500V/µs | 220 MHz | 350 MHz | 2 µA | 200 µV | 6.5mA (x4 Channels) | 80 mA | 2.5 V | 11 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
LTC2057IMS#TRPBFIC OPAMP ZERO-DRIFT 1CIRC 10MSOP |
3,682 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.45V/µs | 1.5 MHz | - | 30 pA | 0.5 µV | 900µA | - | 4.75 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
|
LT1122CS8#TRPBFIC OPAMP JFET 1 CIRCUIT 8SO |
3,829 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | J-FET | 1 | - | 75V/µs | 13 MHz | - | 12 pA | 130 µV | 7.8mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
OP27GHIC OPAMP GP 1 CIRCUIT TO5 |
2,370 |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | General Purpose | 1 | - | 2.8V/µs | 8 MHz | - | 15 nA | 30 µV | - | - | 8 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | TO-5 |
|
|
OP37GHIC OPAMP GP 1 CIRCUIT TO5 |
2,214 |
|
Datasheet | - | TO-205-8, TO-5-8 Metal Can | Bulk | Obsolete | General Purpose | 1 | - | 17V/µs | 63 MHz | - | 15 nA | 30 µV | - | - | 8 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | TO-5 |
|
|
AD847ARZ-REELIC OPAMP GP 1 CIRCUIT 8SOIC |
2,962 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 300V/µs | 50 MHz | - | 3.3 µA | 500 µV | 5.3mA | 32 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
