Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1012CJ8IC OPAMP GP 1 CIRCUIT 8CERDIP |
2,881 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.2V/µs | - | - | 30 pA | 10 µV | 380µA | - | 2.4 V | 40 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
|
LT1124CJ8IC OPAMP GP 2 CIRCUIT 8CERDIP |
4,220 |
|
Datasheet | LT® | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 4.5V/µs | 12.5 MHz | - | 7 nA | 25 µV | 2.3mA (x2 Channels) | - | 8 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
|
LT1126CJ8IC OPAMP GP 2 CIRCUIT 8CERDIP |
3,458 |
|
Datasheet | LT® | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 11V/µs | 65 MHz | - | 7 nA | 20 µV | 2.6mA (x2 Channels) | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD8606ARMZ-R2IC OPAMP GP R-R CMOS 10MHZ 8MSOP |
4,390 |
|
Datasheet | DigiTrim® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | CMOS | 2 | Rail-to-Rail | 5V/µs | 10 MHz | - | 1 pA | 80 µV | 1mA (x2 Channels) | 80 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LT1260CS#TRPBFIC OPAMP CFA 3 CIRCUIT 16SO |
2,893 |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Feedback | 3 | - | 1600V/µs | 130 MHz | 130 MHz | 20 µA | 2 mV | 5mA (x3 Channels) | 60 mA | 4 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
LT1057ISWIC OPAMP JFET 2 CIRCUIT 18SO |
3,228 |
|
Datasheet | LT® | 18-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | J-FET | 2 | - | 13V/µs | 5 MHz | - | 10 pA | 300 µV | 1.7mA (x2 Channels) | - | 20 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 18-SO |
|
|
LT1122DCJ8IC OPAMP JFET 1 CIRCUIT 8CERDIP |
4,089 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 75V/µs | 13 MHz | - | 12 pA | 130 µV | 7.8mA | - | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
|
OP07EJ8IC OPAMP GP 1 CIRCUIT 8CERDIP |
4,180 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.25V/µs | 600 kHz | - | 1.2 nA | 30 µV | - | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
ADA4897-2ARMZ-RLIC OPAMP VFB 2 CIRCUIT 10MSOP |
3,636 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 120V/µs | 90 MHz | 230 MHz | 4 µA | 28 µV | 3mA (x2 Channels) | 80 mA | 3 V | 10 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
|
ADA4895-2ARMZ-RLIC OPAMP VFB 2 CIRCUIT 10MSOP |
4,640 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 943V/µs | 1.5 GHz | 236 MHz | 11 µA | 53 µV | 3mA (x2 Channels) | 116 mA | 3 V | 10 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
