Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1673IS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
3,530 |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA (x2 Channels) | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LTC6253IMS#PBFIC OPAMP GP 2 CIRCUIT 10MSOP |
927 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 280V/µs | 720 MHz | 400 MHz | 1.4 µA | 100 µV | 4.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
|
AD8421ARZ-RLIC INST AMP 1 CIRCUIT 8SOIC |
4,887 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 35V/µs | - | 10 MHz | 1 nA | 60 µV | 2mA | 65 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LTC6410IUD-6#PBFIC OPAMP DIFF 1 CIRCUIT 16QFN |
121 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tube | Last Time Buy | RF/IF Differential | 1 | Differential | 1500V/µs | - | 1.4 GHz | - | 400 µV | 125mA | 42 mA | 2.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (3x3) |
|
AD848AQIC OPAMP GP 1 CIRCUIT 8CERDIP |
2,469 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 300V/µs | 175 MHz | - | 3.3 µA | 200 µV | 5.1mA | 32 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
OP281GRUZ-REELIC OPAMP GP 2 CIRCUIT 8TSSOP |
2,156 |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.028V/µs | 105 kHz | - | 3 nA | 100 µV | 3.3µA (x2 Channels) | 12 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-TSSOP |
|
ADN2890ACPZ-RL7IC LIMITING 1 CIRCUIT 16LFCSP |
1,842 |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | Limiting | 1 | Differential | - | - | - | - | 100 µV | 39mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP-WQ (3x3) |
|
|
AD746AQIC OPAMP JFET 13MHZ 8CDIP |
208,462 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | J-FET | 2 | - | 75V/µs | 13 MHz | 13 MHz | 110 pA | 300 µV | 7mA | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
5962-8771402PAIC OPAMP GP 2 CIRCUIT 8CERDIP |
523 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | 1.3 MHz | - | 30 nA | 3 mV | - | - | 44 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
|
LT1787IS8#TRPBFIC CURRENT SENSE 1 CIRCUIT 8SO |
1,744 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | - | - | 40 µV | 60µA | 50 µA | 2.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
