Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4860-1YRJZ-R2IC OPAMP CFA 1 CIRCUIT SOT23-6 |
3,882 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Discontinued at Digi-Key | Current Feedback | 1 | - | 980V/µs | - | 520 MHz | 1.5 µA | 3.5 mV | 6mA | 85 mA | 5 V | 12 V | -40°C ~ 105°C | - | - | Surface Mount | SOT-23-6 |
|
|
AD8063ART-REELIC OPAMP VF R-R LP 50MA SOT23-6 |
30,000 |
|
Datasheet | - | SOT-23-6 | Bulk | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 650V/µs | - | 320 MHz | 3.5 µA | 1 mV | 6.8mA | 50 mA | 2.7 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
AD8055ART-REELIC OPAMP VF LDIST LN LP SOT23-5 |
29,465 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | Voltage Feedback | 1 | - | 1400V/µs | - | 300 MHz | 400 nA | 3 mV | 5.4mA | 60 mA | 8 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
OP32FZIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,044 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.5V/µs | 4.5 MHz | - | 70 nA | 200 µV | 350µA | - | 3 V | 30 V | -25°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD8677ARZ-REELIC OPAMP GP 1 CIRCUIT 8SOIC |
2,182 |
|
Datasheet | iPolar® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 1 | - | 0.2V/µs | 600 kHz | - | 200 pA | 45 µV | 1.1mA | 15 mA | 8 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP186GRT-REEL7IC OPAMP GP 1 CIRCUIT SOT23-5 |
162,152 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.035V/µs | - | - | 3.2 nA | 4 mV | 3.3µA (x1 Channels) | 2 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
AD8063ART-REEL7IC OPAMP VFB 1 CIRCUIT SOT23-6 |
1,309 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 650V/µs | - | 320 MHz | 3.5 µA | 1 mV | 6.8mA | 50 mA | 2.7 V | 8 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-6 |
|
AD8560ACP-REEL7IC BUFFER AMP 5CH 16V 16-LFCSP |
29,795 |
|
Datasheet | - | 16-VFQFN Exposed Pad, CSP | Bulk | Obsolete | Buffer | 5 | Rail-to-Rail | 8V/µs | - | 8 MHz | 80 nA | 2 mV | 780µA (x5 Channels) | 35 mA | 4.5 V | 32 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP (3x3) |
|
ADA4850-2YCPZ-RLIC OPAMP VFB 2 CIRCUIT 16LFCSP |
3,033 |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Voltage Feedback | 2 | Rail-to-Rail | 220V/µs | 70 MHz | 175 MHz | 2.3 µA | 600 µV | 2.5mA (x2 Channels) | 118 mA | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (3x3) |
|
|
AD8057ART-REEL7IC OPAMP VFB 1 CIRCUIT SOT23-5 |
2,239 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Obsolete | Voltage Feedback | 1 | - | 1150V/µs | - | 325 MHz | 500 nA | 1 mV | 6mA | - | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
