Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADTL084JRZIC OPAMP JFET 5MHZ QUAD 14SOIC |
26,487 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 20V/µs | 5 MHz | - | 2 pA | 1.5 mV | 1.2mA (x4 Channels) | 27 mA | 8 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
ADA4860-1YRJZ-RLIC OPAMP CFA 1 CIRCUIT SOT23-6 |
4,835 |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Current Feedback | 1 | - | 980V/µs | - | 520 MHz | 1.5 µA | 3.5 mV | 6mA | 85 mA | 5 V | 12 V | -40°C ~ 105°C | - | - | Surface Mount | SOT-23-6 |
|
AD8632ARM-R2IC OPAMP GP R-R 5MHZ DUAL 8MSOP |
3,500 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 3V/µs | 5 MHz | - | 250 nA | 800 µV | 300µA (x2 Channels) | 10 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
AD8517ART-R2IC OPAMP GP R-R 7MHZ SOT23-5 |
11,990 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Obsolete | General Purpose | 1 | Rail-to-Rail | 8V/µs | 7 MHz | - | 450 nA | 1.3 mV | 900µA | 10 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
AD8527ARIC OPAMP GP R-R 7MHZ DUAL 8SOIC |
7,995 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 8V/µs | 7 MHz | - | 450 nA | 1.3 mV | 900µA (x2 Channels) | 10 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8534ANIC OPAMP GP 4 CIRCUIT 14DIP |
6,781 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 25 mV | 750µA (x4 Channels) | 250 mA | 2.7 V | 6 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
AD8594AR-REELIC OPAMP GP R-R CMOS 3MHZ 16SOIC |
2,500 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 5V/µs | 3 MHz | - | 5 pA | 2 mV | - | 250 mA | 2.5 V | 6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
OP77GS-REEL7IC OPAMP GP 1 CIRCUIT 8SOIC |
74,272 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Differential | - | - | - | - | - | - | - | 30 V | 30 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OP77GS-REELIC OPAMP GP 1 CIRCUIT 8SOIC |
41,872 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Differential | - | - | - | - | - | - | - | 30 V | 30 V | -25°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OP07DRIC OPAMP GP 600KHZ LN 15MA 8SOIC |
2,964 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.2V/µs | - | - | 200 pA | 45 µV | 1.1mA | 15 mA | 6 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
