Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1880CS5#TRPBFIC OPAMP GP 1 CIRCUIT TSOT23-5 |
4,778 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.55V/µs | 1.1 MHz | - | 150 pA | 40 µV | 1.5mA | 25 mA | 2.7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-5 |
|
LTC6078IDD#PBFIC CMOS 2 CIRCUIT 10DFN |
3,937 |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.05V/µs | 750 kHz | - | 0.2 pA | 10 µV | 55µA (x2 Channels) | 25 mA | 2.7 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-DFN (3x3) |
|
OP292GSZIC OPAMP GP 2 CIRCUIT 8SOIC |
638 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | - | 4V/µs | 4 MHz | - | 375 nA | 1 mV | 1mA (x2 Channels) | 10.5 mA | 4.5 V | 33 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP282ARMZIC OPAMP JFET 2 CIRCUIT 8MSOP |
360 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | J-FET | 2 | - | 9V/µs | 4 MHz | - | 3 pA | 200 µV | 210µA (x2 Channels) | 10 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LT6236HS6#TRMPBFIC OPAMP GP 1 CIRCUIT TSOT23-6 |
1,926 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 70V/µs | 215 MHz | 90 MHz | 5 µA | 100 µV | 3.3mA | - | 3 V | 12.6 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-6 |
|
LTC6102CDD#PBFIC CURRENT SENSE 1 CIRCUIT 8DFN |
192 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tube | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 4 V | 60 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
LTC6101HVCIS5#TRMPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
2,499 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 100 nA | 400 µV | 350µA | 1 mA | 5 V | 100 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-5 |
|
|
LTC6081CDD#PBFIC CMOS 2 CIRCUIT 10DFN |
780 |
|
Datasheet | - | 10-WFDFN Exposed Pad | Tube | Active | CMOS | 2 | Rail-to-Rail | 1V/µs | 3.5 MHz | - | 0.2 pA | 90 µV | 330µA (x2 Channels) | 24 mA | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 10-DFN (3x3) |
|
|
AD8205YRZ-RLIC OPAMP DIFF 1 CIRCUIT 8SOIC |
240 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Differential | 1 | - | 0.5V/µs | - | 50 kHz | - | 2 mV | 2mA | - | 4.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LT1396CDD#PBFIC OPAMP CFA 2 CIRCUIT 8DFN |
2,029 |
|
Datasheet | LT® | 8-WFDFN Exposed Pad | Tube | Active | Current Feedback | 2 | - | 800V/µs | - | 400 MHz | 10 µA | 1 mV | 4.6mA (x2 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
