Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1999IS8-50#PBFIC CURRENT SENSE 1 CIRCUIT 8SO |
176 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Current Sense | 1 | - | 3V/µs | - | 1.2 MHz | 137.5 µA | 500 µV | 5.8mA | - | 4.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
ADA4857-1YRZ-R7IC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
2,935 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 2800V/µs | - | 850 MHz | 2 µA | 2 mV | 5mA | 50 mA | 4.5 V | 10.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LTC6256CDC#TRMPBFIC OPAMP GP 2 CIRCUIT 8DFN |
1,556 |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 1.8V/µs | 6.5 MHz | 4.5 MHz | 5 nA | 100 µV | 65µA (x2 Channels) | 35 mA | 1.8 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (2x2) |
|
LT1637CDD#PBFIC OPAMP GP 1 CIRCUIT 8DFN |
950 |
|
Datasheet | Over-The-Top® | 8-WFDFN Exposed Pad | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.4V/µs | 1.1 MHz | - | 17 nA | 125 µV | 230µA | 31.7 mA | 2.7 V | 44 V | 0°C ~ 70°C | - | - | Surface Mount | 8-DFN (3x3) |
|
AD8223BRMZIC INST AMP 1 CIRCUIT 8MSOP |
190 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Instrumentation | 1 | Rail-to-Rail | 0.3V/µs | - | 200 kHz | 12 nA | 100 µV | 650µA | - | 3 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LT1494CN8#PBFIC OPAMP GP 1 CIRCUIT 8DIP |
136 |
|
Datasheet | Over-The-Top® | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.001V/µs | 2.7 kHz | - | 25 pA | 200 µV | 1.4µA | 1.5 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LTC2050HVIS6#TRMPBFIC OPAMP ZER-DRIFT 1CIR TSOT23-6 |
1,638 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 25 pA | 0.5 µV | 1mA | - | 2.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | TSOT-23-6 |
|
|
LT6220IS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
257 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 20V/µs | 60 MHz | - | 250 nA | 700 µV | 1mA | 50 mA | 2.2 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
LTC6911CMS-1#PBFIC OPAMP PGA 2 CIRCUIT 10MSOP |
4,094 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Active | Programmable Gain | 2 | Rail-to-Rail | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 10-MSOP |
|
|
LTC6240HVIS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
503 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 10V/µs | 18 MHz | - | 0.5 pA | 60 µV | 2.7mA | 35 mA | 2.8 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
