Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NCS199A1SQT2GIC CURRENT SENSE 1 CIRCUIT SC88 |
1,878 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 0.4V/µs | - | 100 kHz | 60 µA | 5 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | SC-88/SC70-6/SOT-363 |
|
|
NCS199A3SQT2GIC CURRENT SENSE 1 CIRCUIT SC88 |
1,569 |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | Rail-to-Rail | 0.4V/µs | - | 40 kHz | 60 µA | 5 µV | 65µA | - | 2.7 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | SC-88/SC70-6/SOT-363 |
|
NCS2001SQ1T2GIC OPAMP GP 1 CIRCUIT SC88A |
2,492 |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 10 pA | 500 µV | 820µA | 96 mA | 0.9 V | 7 V | -40°C ~ 105°C | - | - | Surface Mount | SC-88A (SC-70-5/SOT-353) |
|
SA5230DGIC OPAMP GP 1 CIRCUIT 8SOIC |
2,236 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.25V/µs | 600 kHz | - | 40 nA | 400 µV | 1.1mA | 32 mA | 1.8 V | 15 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LF411CDIC OPAMP JFET 1 CIRCUIT 8SOIC |
16,517 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 1 | - | 13V/µs | 3 MHz | - | 50 pA | 800 µV | 2mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM358MIC OPAMP GP 2 CIRCUIT 8SOIC |
4,177 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 2 mV | 800µA (x2 Channels) | 40 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
NCV20071XV53T2GIC OPAMP GP 1 CIRCUIT SOT553 |
3,283 |
|
Datasheet | - | SOT-553 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.4V/µs | 3 MHz | - | 5 pA | 1.3 mV | 480µA | 65 mA | 2.7 V | 36 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | SOT-553 |
|
MC33204VDGIC OPAMP GP 4 CIRCUIT 14SOIC |
1,134 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 80 nA | 10 mV | 900µA (x4 Channels) | 80 mA | 1.8 V | 12 V | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
MC33502PGIC OPAMP GP 2 CIRCUIT 8DIP |
1,894 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 3V/µs | 5 MHz | - | 0.04 pA | 500 µV | 1.65mA (x2 Channels) | 70 mA | 1 V | 7 V | -40°C ~ 105°C | - | - | Through Hole | 8-PDIP |
|
|
MC34184MLOW POWER OP-AMP |
1,655 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
