Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NCV33202VDR2IC OPAMP DUAL R-R LOW VOLT 8SOIC |
2,244 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 80 nA | 8 mV | 900µA (x2 Channels) | 80 mA | 1.8 V | 12 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
KA324IC OPAMP GP 4 CIRCUIT 14MDIP |
1,328 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | - | - | - | 40 nA | 1.5 mV | 1mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 14-MDIP |
|
MC33284DR2IC OPAMP JFET 4 CIRCUIT 14SOIC |
1,447 |
|
Datasheet | MC33282/284 | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | J-FET | 4 | - | 15V/µs | 35 MHz | - | 30 pA | 200 µV | 2.15mA (x4 Channels) | 27 mA | 5 V | 72 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
NE5532DR2GIC OPAMP GP 2 CIRCUIT 16SOIC |
4,212 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | - | 9V/µs | 10 MHz | - | 300 nA | 500 µV | 8mA | 38 mA | 6 V | 40 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
MC33202VDGIC OPAMP GP 2 CIRCUIT 8SOIC |
3,804 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | Rail-to-Rail | 1V/µs | 2.2 MHz | - | 80 nA | 8 mV | 900µA (x2 Channels) | 80 mA | 1.8 V | 12 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
S74LCX16245DTR2GINTEGRATED CIRCUIT |
3,340 |
|
Datasheet | - | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
NCS2004AMUTAGIC OPAMP GP 1 CIRCUIT 6UDFN |
1,697 |
|
Datasheet | - | 6-UFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | General Purpose | 1 | Rail-to-Rail | 2.6V/µs | 3.5 MHz | - | 45 pA | 500 µV | 400µA | 13 mA | 2.5 V | 16 V | -40°C ~ 105°C | - | - | Surface Mount | 6-UDFN (1.6x1.6) |
|
|
MC33078ML1IC OPAMP GP 2 CIRCUIT |
6,000 |
|
Datasheet | - | - | Bulk | Active | General Purpose | 2 | - | 7V/µs | 16 MHz | - | 300 nA | 150 µV | 2.05mA (x2 Channels) | 37 mA | 10 V | 36 V | -40°C ~ 85°C (TA) | - | - | - | - |
|
MC33077PGIC OPAMP GP 2 CIRCUIT 8DIP |
4,049 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 11V/µs | 37 MHz | - | 280 nA | 130 µV | 3.5mA | 33 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AU5517DR2IC AMP 2 CURRENT CTRL 16-SOIC |
1,716 |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Transconductance | 2 | - | 50V/µs | 2 MHz | - | 400 nA | 400 µV | 2.6mA | 650 µA | 44 V | 44 V | 150°C (TJ) | - | - | Surface Mount | 16-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
