Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PGA205AUPGA205 PROGRAMMABLE GAIN INSTRUM |
3,118 |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | Instrumentation | 1 | - | 0.7V/µs | - | 1 MHz | 500 pA | 25 µV | 5.2mA | 23 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LF256HLF256 - JFET INPUT OPERATIONAL A |
1,968 |
|
Datasheet | BI-FET™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 kHz | - | 30 pA | 3 mV | 5mA | - | 10 V | 44 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
LMC6001BIHIC OPAMP GP 1 CIRCUIT TO99-8 |
1,462 |
|
Datasheet | LMC® | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.025 pA | 10 mV | 550µA | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | TO-99-8 |
|
CLC401AJIC OPAMP CFA 1 CIRCUIT 8CDIP |
115 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Current Feedback | 1 | - | 800V/µs | - | 100 MHz | 30 µA | 6 mV | - | 70 mA | 10 V | 10 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
LM709AW/883IC OPAMP GP 1 CIRCUIT 10CFP |
227 |
|
Datasheet | - | 10-CFlatPack | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | 250 kHz | - | 500 nA | 3 mV | - | - | 36 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 10-CFP |
|
LM124W/883IC OPAMP GP 4 CIRCUIT 14CFP |
962 |
|
Datasheet | - | 14-CFlatPack | Bulk | Active | General Purpose | 4 | Differential | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-CFP |
|
|
CLC409AJ-QMLIC OPAMP CFA 1 CIRCUIT 8CDIP |
769 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 1 | - | 1200V/µs | - | 350 MHz | 10 µA | 500 µV | 13.5mA | 60 mA | 7 V | 7 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-CDIP |
|
CLC431AJ-QMLIC OPAMP CFA 2 CIRCUIT 14CERDIP |
329 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 2 | - | 2000V/µs | - | 720 MHz | 2 µA | 2 mV | 7.1mA (x2 Channels) | 60 mA | 16.5 V | 16.5 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CERDIP |
|
LMC6042AIJIC CMOS 2 CIRCUIT 8CDIP |
139 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-CDIP |
|
|
CLC415AJ-QMLIC OPAMP CFA 4 CIRCUIT 14CERDIP |
154 |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 4 | - | 1200V/µs | - | - | 25 µA | 10 mV | - | 70 mA | 10 V | 10 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CERDIP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
