Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MCP6C02T-100H/Q8BIC CURRENT SENSE 1 CIRCUIT 8VDFN |
2,554 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 500 kHz | - | 170 µA | 1.5 µV | 490µA | - | 2 V | 5.5 V | -40°C ~ 150°C (TA) | - | - | Surface Mount, Wettable Flank | 8-VDFN (3x3) |
|
|
MCP6C02T-020H/Q8BIC CURRENT SENSE 1 CIRCUIT 8VDFN |
2,266 |
|
Datasheet | - | 8-VDFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 500 kHz | - | 170 µA | 1.9 µV | 490µA | - | 2 V | 5.5 V | -40°C ~ 150°C (TA) | - | - | Surface Mount, Wettable Flank | 8-VDFN (3x3) |
|
MCP6V28-E/MSIC OPAMP ZERO-DRIFT 1 CIRC 8MSOP |
1,769 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 1V/µs | 2 MHz | - | 7 pA | 2 µV | 620µA | - | 2.3 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
MCP629-E/MLIC OPAMP GP 4 CIRCUIT 16QFN |
1,145 |
|
Datasheet | - | 16-VQFN Exposed Pad | Tube | Active | General Purpose | 4 | Rail-to-Rail | 7V/µs | 10 MHz | - | 1 pA | 3 mV | 1mA (x4 Channels) | 25 mA | 2.4 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-QFN (4x4) |
|
MCP6L01UT-E/OTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,263 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.6V/µs | 1 MHz | - | 2 pA | 1 mV | 85µA | - | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
MCP6441T-E/OTIC OPAMP GP 1 CIRCUIT SOT23-5 |
1,288 |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.003V/µs | 9 kHz | - | 1 pA | 4.5 mV | 450nA | - | 1.4 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
MCP6S21-I/MSIC OPAMP PGA 1 CIRCUIT 8MSOP |
4,143 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Programmable Gain | 1 | Rail-to-Rail | 22V/µs | - | 12 MHz | 1 pA | 275 µV | 1mA | 30 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
MCP6283-E/SNIC OPAMP GP 1 CIRCUIT 8SOIC |
1,765 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 2.5V/µs | 5 MHz | - | 1 pA | 3 mV | 450µA | 25 mA | 2.2 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
MCP6274-E/PIC OPAMP GP 4 CIRCUIT 14DIP |
1,925 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 0.9V/µs | 2 MHz | - | 1 pA | 3 mV | 170µA (x4 Channels) | 25 mA | 2 V | 6 V | -40°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
MCP6D11-E/MGIC OPAMP DIFF 1 CIRCUIT 16QFN |
1,560 |
|
Datasheet | - | 16-VFQFN Exposed Pad | Tube | Active | Differential | 1 | Differential, Rail-to-Rail | 25V/µs | 90 MHz | - | - | - | 1.4mA | - | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QFN (3x3) |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
