Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MCP6054-E/STIC CMOS 4 CIRCUIT 14TSSOP |
2,615 |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | CMOS | 4 | Rail-to-Rail | 0.15V/µs | 385 kHz | - | 1 pA | 150 µV | 30µA (x4 Channels) | 26 mA | 1.8 V | 6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
MCP6V54-E/SLQUAD, 45V ZERO-DRIFT OP AMP, E T |
1,024 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 4 | - | 1.2V/µs | 2 MHz | - | 60 pA | - | - | 46 mA | 4.5 V | 45 V | - | - | - | Surface Mount | 14-SOIC |
|
|
MCP6V94-E/STIC OPAMP ZER-DRIFT 4CIRC 14TSSOP |
1,706 |
|
Datasheet | Zero-Drift | 14-TSSOP (0.173", 4.40mm Width) | Tube | Active | Zero-Drift | 4 | Rail-to-Rail | 9.5V/µs | 10 MHz | - | 2 pA | 9 µV | 1.1mA (x4 Channels) | 40 mA | 2.4 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
TC7650CPAIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
2,523 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 1 | - | 2.5V/µs | 2 MHz | - | 1.5 pA | 0.7 µV | 2mA | - | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
TC913BCOAIC OPAMP ZERO-DRIFT 2 CIRC 8SOIC |
3,456 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 2 | - | 2.5V/µs | 1.5 MHz | - | 120 pA | 15 µV | - | 10 mA | 7 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
TC7652CPAIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
3,337 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 1 | - | 1V/µs | 400 kHz | - | 30 pA | 2 mV | 1mA | - | 5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
TC913BCPAIC OPAMP ZERO-DRIFT 2 CIRC 8DIP |
2,624 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 2 | - | 2.5V/µs | 1.5 MHz | - | 90 pA | 5 µV | 650µA (x2 Channels) | 10 mA | 7 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
TC913ACPAIC OPAMP ZERO-DRIFT 2 CIRC 8DIP |
1,281 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 2 | - | 2.5V/µs | 1.5 MHz | - | 90 pA | 5 µV | 650µA (x2 Channels) | 10 mA | 7 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MCP6231-E/MCIC OPAMP GP 1 CIRCUIT 8DFN |
294 |
|
Datasheet | - | 8-VFDFN Exposed Pad | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.15V/µs | 300 kHz | - | 1 pA | 5 mV | 20µA | - | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (2x3) |
|
|
MCP6G01-E/SNIC OPAMP GP 1 CIRCUIT 8SOIC |
4,041 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 4.5V/µs | - | 900 kHz | 1 pA | 1 mV | 110µA | - | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
