Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX480CPAIC OPAMP GP 1 CIRCUIT 8DIP |
4,117 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.012V/µs | - | - | 1 nA | 25 µV | 14µA | 5 mA | 1.6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4369EBL+TIC OP AMP DUAL R-R 9-UCSP |
2,500 |
|
Datasheet | - | 9-WFBGA, WLBGA | Bulk | Obsolete | General Purpose | 2 | Differential, Rail-to-Rail | 1V/µs | 3.5 MHz | - | 200 nA | 350 µV | 1mA (x2 Channels) | 250 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 9-WLP |
|
|
ICL7652BCPAIC OPAMP CHOPPER/STABLE 8-DIP |
1,560 |
|
Datasheet | * | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 0.5V/µs | - | - | - | - | - | - | - | - | - | - | - | Through Hole | 8-PDIP |
|
MAX473MJAIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,060 |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
MAX4207ETEIC LOGARITHMIC 1 CIRCUIT 16TQFN |
2,937 |
|
Datasheet | - | 16-WQFN Exposed Pad | Tube | Obsolete | Logarithmic | 1 | - | 12V/µs | 5 MHz | 1 MHz | 10 pA | 600 µV | 5mA | 58 mA | 2.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 16-TQFN (4x4) |
|
ICL7642CCPDIC CMOS 4 CIRCUIT 14DIP |
3,904 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 10 mV | 1mA (x4 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX9627ATC+TIC OPAMP DIFF 1 CIRCUIT 12TQFN |
4,103 |
|
Datasheet | - | 12-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 6100V/µs | - | 700 MHz | 1 µA | 2 mV | 59mA | 100 mA | 2.85 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 12-TQFN (3x3) |
|
MAX3760ESAIC PREAMP LN TRANS 622MBPS 8SOIC |
1,665 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Transimpedance | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 8-SOIC |
|
MAX494CSDIC OPAMP GP 4 CIRCUIT 14SOIC |
2,150 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 25 nA | 200 µV | 150µA (x4 Channels) | 30 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
MAX4183EUBIC OPAMP CFA 2 CIRC 10UMAX/USOP |
134 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 450V/µs | - | 245 MHz | 1 µA | 1.5 mV | 1mA (x2 Channels) | 60 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 10-uMAX/uSOP |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
