Instrumentation, Op Amps, Buffer Amps
Review Instrumentation, Op Amps, Buffer Amps Linear components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX437ESA+IC OPAMP GP 1 CIRCUIT 8SOIC |
24,111 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 17V/µs | 60 MHz | - | 10 nA | 5 µV | - | - | 44 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
MAX4178EPAIC BUFFER CLSD-LOOP 330MHZ 8-DIP |
1,288 |
|
Datasheet | * | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 1 | - | 1600V/µs | - | - | - | - | - | - | - | - | - | - | - | Through Hole | 8-PDIP |
|
MAX4383ESD+IC OPAMP VFB 4 CIRCUIT 14SOIC |
144 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Last Time Buy | Voltage Feedback | 4 | Rail-to-Rail | 485V/µs | - | 210 MHz | 8.5 µA | 3 mV | 7.5mA (x4 Channels) | 75 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
|
ICL7650CSD+IC OPAMP ZERO-DRIFT 1CIRC 14SOIC |
3,799 |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Zero-Drift | 1 | - | 2.5V/µs | 2 MHz | - | 1.5 pA | 700 µV | 1.2mA | - | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
MAX4202EUKLOW-POWER, OPEN-LOOP BUFFER |
1,243 |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | Buffer | 1 | - | 4200V/µs | - | 780 MHz | 800 nA | 1 mV | 2.2mA | 44 mA | 8 V | 11 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
ICL7650CPAIC OPAMP ZER-DRIFT 1CIRC 8DIP |
4,310 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 2.5V/µs | 2 MHz | - | 1.5 pA | 700 µV | 1.2mA | - | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX479CPD+IC OPAMP SNGL SUP QUAD 14-DIP |
458 |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | General Purpose | 4 | - | 0.04V/µs | 85 kHz | - | 3 nA | 50 µV | 13µA (x4 Channels) | - | 3 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
MAX478CPAIC OPAMP GP 2 CIRCUIT 8DIP |
2,571 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | Differential | 0.04V/µs | 85 kHz | - | 3 nA | 50 µV | 13µA (x2 Channels) | - | 3 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
MAX412CPAIC OPAMP GP 2 CIRCUIT 8DIP |
2,904 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 4.5V/µs | 28 MHz | - | 80 nA | 120 µV | 2.5mA (x2 Channels) | 35 mA | 4.8 V | 10.5 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX480CSAIC OPAMP GP 1 CIRCUIT 8SOIC |
2,195 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 0.012V/µs | - | - | 1 nA | 25 µV | 14µA | 5 mA | 1.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Frequently Asked Questions
What are Instrumentation, Op Amps, Buffer Amps components used for?
Instrumentation, Op Amps, Buffer Amps components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Instrumentation, Op Amps, Buffer Amps part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
