Fixed Inductors
Review Fixed Inductors Inductors, Coils, Chokes components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Material - Core | Inductance | Tolerance | Current Rating (Amps) | Current - Saturation (Isat) | Shielding | DC Resistance (DCR) | Q @ Freq | Frequency - Self Resonant | Ratings | Operating Temperature | Inductance Frequency - Test | Features | Mounting Type | Supplier Device Package | Size / Dimension | Height - Seated (Max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SMRF1512S-334MSSHLD EPOXY-COATED CHIP INDUCTOR |
4,922 |
|
Datasheet | SMRF1512S | Nonstandard | Tape & Reel (TR) | Active | Molded | Ferrite | 3.3 mH | ±20% | 35 mA | - | Shielded | 39Ohm Max | 75 @ 250kHz | 1.2MHz | - | -55°C ~ 125°C | 250 kHz | - | Surface Mount | - | 0.155" L x 0.125" W (3.94mm x 3.18mm) | 0.140" (3.56mm) |
|
|
050KM3303SMLFTOROIDAL INDUCTOR |
4,573 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 330 µH | ±10% | 1.69 A | 500mA | Shielded | 190mOhm Max | - | 1MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.700" L x 0.670" W (17.78mm x 17.02mm) | 0.405" (10.28mm) |
|
|
050KM3303SMTOROIDAL INDUCTOR |
2,131 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 330 µH | ±10% | 1.69 A | 500mA | Shielded | 190mOhm Max | - | 1MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.700" L x 0.670" W (17.78mm x 17.02mm) | 0.405" (10.28mm) |
|
|
121AT1003SMLFWIREWOUND TOROIDAL INDUCTOR |
3,936 |
|
Datasheet | ATSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 100 µH | ±10% | 3.24 A | 5.2A | Shielded | 65mOhm Max | - | 2MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.940" L x 0.940" W (23.88mm x 23.88mm) | 0.510" (12.95mm) |
|
|
121AT1003SMWIREWOUND TOROIDAL INDUCTOR |
4,289 |
|
Datasheet | ATSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 100 µH | ±10% | 3.24 A | 5.2A | Shielded | 65mOhm Max | - | 2MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.940" L x 0.940" W (23.88mm x 23.88mm) | 0.510" (12.95mm) |
|
|
121KM1003SMTOROIDAL INDUCTOR |
4,639 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 100 µH | ±10% | 3.24 A | 2.8A | Shielded | 65mOhm Max | - | 2MHz | AEC-Q200 | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.940" L x 0.940" W (23.88mm x 23.88mm) | 0.510" (12.95mm) |
|
|
121KM1003SMLFTOROIDAL INDUCTOR |
1,326 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 100 µH | ±10% | 3.24 A | 2.8A | Shielded | 65mOhm Max | - | 2MHz | AEC-Q200 | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.940" L x 0.940" W (23.88mm x 23.88mm) | 0.510" (12.95mm) |
|
|
894KM2503VLFVERTICAL TOROIDAL INDUCTOR |
2,981 |
|
Datasheet | KM | Radial, Vertical Cylinder (Open) | Bulk | Active | Toroidal | - | 250 µH | ±10% | 5 A | 3.2A | Shielded | 60mOhm Max | - | 1MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 1.300" Dia x 0.650" W (33.02mm x 16.51mm) | - |
|
|
121AT1503SMLFWIREWOUND TOROIDAL INDUCTOR |
3,229 |
|
Datasheet | ATSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 15 µH | ±10% | 2.68 A | 4.8A | Shielded | 95mOhm Max | - | 1.5MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.940" L x 0.940" W (23.88mm x 23.88mm) | 0.510" (12.95mm) |
|
|
ER17S681KRM39010 LEV-R AXIAL INDUCTOR |
2,039 |
|
Datasheet | ER17S | Axial | Tape & Reel (TR) | Active | Molded | Iron Powder | 6.8 µH | ±10% | 280 mA | - | Shielded | 1.02Ohm Max | 50 @ 7.9MHz | 55MHz | - | -55°C ~ 125°C | 7.9 MHz | - | Through Hole | Axial | 0.162" Dia x 0.410" L (4.11mm x 10.41mm) | - |
Frequently Asked Questions
What are Fixed Inductors components used for?
Fixed Inductors components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Fixed Inductors part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Fixed Inductors parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
