Fixed Inductors
Review Fixed Inductors Inductors, Coils, Chokes components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Material - Core | Inductance | Tolerance | Current Rating (Amps) | Current - Saturation (Isat) | Shielding | DC Resistance (DCR) | Q @ Freq | Frequency - Self Resonant | Ratings | Operating Temperature | Inductance Frequency - Test | Features | Mounting Type | Supplier Device Package | Size / Dimension | Height - Seated (Max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SMP3316S-472MSHIELDED OPEN CONST INDUCTOR |
3,328 |
|
Datasheet | SMP3316S | Nonstandard | Tape & Reel (TR) | Active | - | Ferrite | 47 µH | ±20% | 800 mA | 2.1A | Shielded | 472mOhm Max | - | - | - | -55°C ~ 125°C | - | - | Surface Mount | - | 0.530" L x 0.420" W (13.46mm x 10.67mm) | 0.200" (5.08mm) |
|
|
SMP3316S-152MSHIELDED OPEN CONST INDUCTOR |
1,211 |
|
Datasheet | SMP3316S | Nonstandard | Tape & Reel (TR) | Active | - | Ferrite | 15 µH | ±20% | 1.5 A | 3.8A | Shielded | 150mOhm Max | - | - | - | -55°C ~ 125°C | - | - | Surface Mount | - | 0.530" L x 0.420" W (13.46mm x 10.67mm) | 0.200" (5.08mm) |
|
|
SMP3316S-222MLFSHIELDED OPEN CONST INDUCTOR |
3,072 |
|
Datasheet | SMP3316S | Nonstandard | Tape & Reel (TR) | Active | - | Ferrite | 2.2 mH | ±20% | 1.3 A | 3.1A | Shielded | 207mOhm Max | - | - | - | -55°C ~ 125°C | - | - | Surface Mount | - | 0.530" L x 0.420" W (13.46mm x 10.67mm) | 0.200" (5.08mm) |
|
|
SMP3316S-222MSHIELDED OPEN CONST INDUCTOR |
2,726 |
|
Datasheet | SMP3316S | Nonstandard | Tape & Reel (TR) | Active | - | Ferrite | 2.2 mH | ±20% | 1.3 A | 3.1A | Shielded | 207mOhm Max | - | - | - | -55°C ~ 125°C | - | - | Surface Mount | - | 0.530" L x 0.420" W (13.46mm x 10.67mm) | 0.200" (5.08mm) |
|
|
SMP3316S-102MSHIELDED OPEN CONST INDUCTOR |
3,417 |
|
Datasheet | SMP3316S | Nonstandard | Tape & Reel (TR) | Active | - | Ferrite | 1 mH | ±20% | 2 A | 4.6A | Shielded | 101mOhm Max | - | - | - | -55°C ~ 125°C | - | - | Surface Mount | - | 0.530" L x 0.420" W (13.46mm x 10.67mm) | 0.200" (5.08mm) |
|
|
SMRF1512-822KSWW EPOXY COATED CHIP INDUCTOR |
3,908 |
|
Datasheet | SMRF1512 | Nonstandard | Tape & Reel (TR) | Active | Wirewound | Iron Powder | 82 µH | ±10% | 64 mA | - | Unshielded | 12Ohm Max | 60 @ 2.5MHz | 9MHz | - | -55°C ~ 125°C | 2.5 MHz | - | Surface Mount | - | 0.155" L x 0.125" W (3.94mm x 3.18mm) | 0.140" (3.56mm) |
|
|
121KM1503SMLFTOROIDAL INDUCTOR |
4,722 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 150 µH | ±10% | 2.68 A | 2.2A | Shielded | 95mOhm Max | - | 1.5MHz | AEC-Q200 | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.940" L x 0.940" W (23.88mm x 23.88mm) | 0.510" (12.95mm) |
|
|
121KM1503SMTOROIDAL INDUCTOR |
1,744 |
|
Datasheet | KMSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 150 µH | ±10% | 2.68 A | 2.2A | Shielded | 95mOhm Max | - | 1.5MHz | AEC-Q200 | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.940" L x 0.940" W (23.88mm x 23.88mm) | 0.510" (12.95mm) |
|
|
894KM2502VLFVERTICAL TOROIDAL INDUCTOR |
1,554 |
|
Datasheet | KM | Radial, Vertical (Open) | Bulk | Active | Toroidal | - | 25 µH | ±10% | 12.8 A | 11A | Shielded | 12mOhm Max | - | 8MHz | - | -55°C ~ 130°C | 1 kHz | - | Through Hole | Radial | 1.300" Dia (33.02mm) | 0.650" (16.51mm) |
|
|
040AT1503SMWIREWOUND TOROIDAL INDUCTOR |
2,032 |
|
Datasheet | ATSM | Nonstandard | Tape & Reel (TR) | Active | Toroidal | - | 150 µH | ±10% | 1.45 A | 1.4A | Shielded | 190mOhm Max | - | 3.5MHz | - | -55°C ~ 130°C | 1 kHz | - | Surface Mount | - | 0.565" L x 0.560" W (14.35mm x 14.22mm) | 0.360" (9.14mm) |
Frequently Asked Questions
What are Fixed Inductors components used for?
Fixed Inductors components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Fixed Inductors part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Fixed Inductors parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
