RF Receiver, Transmitter, and Transceiver Finished Units
Review RF Receiver, Transmitter, and Transceiver Finished Units RF and Wireless components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Packaging | Product Status | Function | Modulation or Protocol | Frequency | Applications | Interface | Sensitivity | Power - Output | Data Rate (Max) | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
GT-505GGBL5-DR-NRCVR GNSS DEAD RECKONING TTL |
3,464 |
|
Datasheet | GT | Bag | Active | Receiver | BeiDou, Galileo, GLONASS, GNSS, GPS | 530MHz | GPS | UART | -165dBm | - | 961.2kbps | Antenna Included |
|
|
GT-502MGGB-NRF RCVR GPS/GLONASS/BEIDOU TTL |
1,880 |
|
Datasheet | GT | Active | Receiver | BeiDou, Galileo, GLONASS, GNSS, GPS | - | GPS | UART | -165dBm | - | 921.6kbps | - | |
|
|
GT-505GGBL5-DR-MX4RCVR GNSS DEAD RECKONING TTL |
4,649 |
|
Datasheet | GT | Bag | Active | Receiver | BeiDou, Galileo, GLONASS, GNSS, GPS | 1.176GHz, 1.207GHz, 1.561GHz, 1.575GHz, 1.602GHz | Location, Navigation, Tracking | TTL, UART | -165dBm | - | 961.2kbps | Built-In Antenna, IP67 |
|
|
GR-505GGBL5-DR-NRCVR GNSS DEAD RECKONING RS232 |
1,092 |
|
Datasheet | GR | Bag | Active | Receiver | BeiDou, Galileo, GLONASS, GNSS, GPS | 530MHz | GPS | RS-232 | -165dBm | - | 961.2kbps | Antenna Included |
|
|
GR-505GGBL5-DR-MX4RCVR GNSS DEAD RECKONING RS232 |
4,440 |
|
Datasheet | GR | Bag | Active | Receiver | BeiDou, Galileo, GLONASS, GNSS, GPS | 1.176GHz, 1.207GHz, 1.561GHz, 1.575GHz, 1.602GHz | Location, Navigation, Tracking | Connector, RS-232 | -165dBm | - | 961.2kbps | Built-In Antenna, IP67 |
Frequently Asked Questions
What are RF Receiver, Transmitter, and Transceiver Finished Units components used for?
RF Receiver, Transmitter, and Transceiver Finished Units components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right RF Receiver, Transmitter, and Transceiver Finished Units part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find RF Receiver, Transmitter, and Transceiver Finished Units parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
