RF Amplifiers
Review RF Amplifiers RF and Wireless components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Frequency | P1dB | Gain | Noise Figure | RF Type | Voltage - Supply | Current - Supply | Test Frequency | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HMC390LP4EIC AMP VSAT 3.55GHZ-3.9GHZ 24QFN |
4,023 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Strip | Active | 3.55GHz ~ 3.9GHz | - | - | - | VSAT | 3V | 42mA | 3.55GHz | - | - | Surface Mount | 24-QFN (4x4) |
|
|
HMC386LP4ETRIC RF AMP 2.6GHZ-2.8GHZ 24QFN |
840 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 2.6GHz ~ 2.8GHz | - | - | - | - | 3V | 35mA | - | - | - | Surface Mount | 24-QFN (4x4) |
|
HMC386LP4EIC RF AMP 2.6GHZ-2.8GHZ 24QFN |
2,629 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Strip | Active | 2.6GHz ~ 2.8GHz | - | - | - | - | 3V | 35mA | - | - | - | Surface Mount | 24-QFN (4x4) |
|
HMC373LP3ETRIC AMP CDMA 700MHZ-1GHZ 16LFCSP |
164 |
|
Datasheet | - | 16-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | 700MHz ~ 1GHz | 21dBm | 14dB | 1dB | CDMA, GSM | 5V | 90mA | 1GHz | - | - | Surface Mount | 16-LFCSP (3x3) |
|
HMC457QS16GETRIC AMP GPS 1.7GHZ-2.2GHZ 16QSOP |
158 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Active | 1.7GHz ~ 2.2GHz | 29dBm | 27dB | 6dB | General Purpose | 5V | 500mA | 1.9GHz | - | - | Surface Mount | 16-QSOP-EP |
|
ADL5724ACPZN-R7IC AMP 12.7GHZ-15.4GHZ 8LFCSP |
1,917 |
|
Datasheet | - | 8-UFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | 12.7GHz ~ 15.4GHz | -11dBm | 26dB | 2.4dB | - | 1.8V ~ 3.3V | 90mA | - | - | - | Surface Mount | 8-LFCSP-UD (2x2) |
|
|
ADL5721ACPZN-R7IC RF AMP 5.9GHZ-8.5GHZ 8LFCSP |
2,326 |
|
Datasheet | - | 8-UFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | 5.9GHz ~ 8.5GHz | -10dBm | 25dB | 1.7dB | - | 3.3V | 74mA | - | - | - | Surface Mount | 8-LFCSP-UD (2x2) |
|
AD605ANZIC RF AMP 16DIP |
1,662 |
|
Datasheet | X-AMP® | 16-DIP (0.300", 7.62mm) | Bulk | Active | - | 15dBm | 34dB | 12dB | - | 4.5V ~ 5.5V | 23mA | - | - | - | Through Hole | 16-PDIP |
|
ADRF6521ACPZIC RF AMP GPS 3GHZ 20LFCSP |
2,297 |
|
Datasheet | - | 20-WFQFN Exposed Pad, CSP | Strip | Active | 3GHz | - | 18dB | 34.3dB | General Purpose | 4V ~ 5V | 200mA | - | - | - | Surface Mount | 20-LFCSP (3x3) |
|
|
HMC506LP4ETRIC AMP VSAT 7.8GHZ-8.7GHZ 24QFN |
315 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Active | 7.8GHz ~ 8.7GHz | - | - | - | VSAT | 3V | 77mA | - | - | - | Surface Mount | 24-QFN (4x4) |
Frequently Asked Questions
What are RF Amplifiers components used for?
RF Amplifiers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right RF Amplifiers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find RF Amplifiers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
