Power Distribution Switches, Load Drivers
Explore Power Distribution Switches, Load Drivers parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE92464EDHPXUMA14CH SOLENOID DRIVER IC |
1,597 |
|
Datasheet | 36-BFSOP (0.295", 7.50mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 4 | 1:4 | Low Side | N-Channel | SPI | 6V ~ 18V | 4.5V ~ 5.5V | 2.7A | 115mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Over Temperature | -40°C ~ 175°C (TJ) | - | - | Surface Mount | PG-DSO-36-72 |
|
MAX14915AFM+IC PWR DRIVER 1:8 48QFN |
2,921 |
|
Datasheet | 48-VFQFN Exposed Pad | - | Tray | Active | General Purpose | 8 | 1:8 | High Side | - | SPI, Parallel | 10V ~ 36V | 2.5V ~ 5.5V | 1.3A | 120mOhm | - | Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TA) | - | - | Surface Mount | 48-FCQFN (6x6) |
|
MAX14915AFM+TIC PWR DRIVER 1:8 48QFN |
727 |
|
Datasheet | 48-VFQFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 8 | 1:8 | High Side | - | SPI, Parallel | 10V ~ 36V | 2.5V ~ 5.5V | 1.3A | 120mOhm | - | Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TA) | - | - | Surface Mount | 48-FCQFN (6x6) |
|
LMG3410R070RWHTPWR MGMT MOSFET/PWR DRIVER |
445 |
|
Datasheet | 32-VQFN Exposed Pad | - | Tape & Reel (TR) | Active | Load Switch | 1 | 1:1 | High Side | N-Channel | Logic, PWM | 480V (Max) | 9.5V ~ 18V | 12A | 70mOhm | Non-Inverting | Bootstrap Circuit, 5V Regulated Output | Over Current, Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 32-VQFN (8x8) |
|
MAX14912AKN+IC PWR DRIVER 1:8 56QFN |
2,561 |
|
Datasheet | 56-VFQFN Exposed Pad | - | Tray | Active | General Purpose | 8 | 1:8 | High Side | - | SPI, Parallel | 10.5V ~ 36V | 1.6V ~ 5.5V | - | 110mOhm | - | Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TA) | - | - | Surface Mount | 56-QFN (8x8) |
|
LMG3422R030RQZTIC HALF BRIDGE DRVR 1.2A 54VQFN |
278 |
|
Datasheet | 54-VQFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | Low Side | N/P-Channel | PWM | 600V | 7.5V ~ 18V | 40A | 26mOhm | Non-Inverting | Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 54-VQFN (12x12) |
|
AP2111MPG-13IC PWR SWITCH P-CHAN 1:1 8MSOP |
2,316 |
|
Datasheet | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 2A | 90mOhm | Non-Inverting | Load Discharge, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -35°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP-EP |
|
SI1865DDL-T1-BE3IC PWR SWITCH P-CHAN 1:1 SC70-6 |
2,699 |
|
Datasheet | 6-TSSOP, SC-88, SOT-363 | TrenchFET® | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 12V | 1.5V ~ 8V | 1.1A | 165mOhm | - | Slew Rate Controlled | - | -55°C ~ 150°C (TJ) | - | - | Surface Mount | SC-70-6 |
|
TPS22925CNYPHRIC PWR SWITCH N-CHAN 1:1 6DSBGA |
15,164 |
|
Datasheet | 6-XFBGA, DSBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.65V ~ 3.6V | Not Required | 3A | 9.2mOhm | Non-Inverting | Slew Rate Controlled | Reverse Current | -40°C ~ 105°C (TA) | - | - | Surface Mount | 6-DSBGA |
|
MIC2095-2YMT-TRIC PWR SWITCH P-CHAN 1:1 6TMLF |
7,970 |
|
Datasheet | 6-UFDFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 2.5V ~ 5.5V | Not Required | 500mA | 170mOhm | Non-Inverting | Slew Rate Controlled | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 6-TMLF® (1.6x1.6) |
|
SLG5NT1477VIC PWR SWITCH N-CHAN 1:1 9TDFN |
13,655 |
|
Datasheet | 9-PowerWFDFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | - | - | 3V ~ 5.25V | 6A | 7.4mOhm | CMOS | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 9-FC-TDFN (1.5x2) |
|
MIC94064YMT-TRIC PWR SWITCH P-CHAN 1:1 4TMLF |
11,419 |
|
Datasheet | 4-UFDFN Exposed Pad, 4-TMLF® | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.7V ~ 5.5V | Not Required | 2A | 85mOhm | Non-Inverting | Slew Rate Controlled | - | -40°C ~ 125°C (TA) | - | - | Surface Mount | 4-TMLF® (1.2x1.6) |
|
SIP32462DB-T2-GE1IC PWR SWITCH N-CHAN 1:1 4WCSP |
8,711 |
|
Datasheet | 4-UFBGA, CSPBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 1.2V ~ 5.5V | Not Required | 1.2A | 50mOhm | Non-Inverting | Slew Rate Controlled | Reverse Current | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WCSP (0.76x0.76) |
.jpg "SIP32448DNP-T1-GE4")
|
SIP32448DNP-T1-GE4IC PWR SWITCH N-CHAN 1:1 4TDFN |
4,664 |
|
Datasheet | 4-UFDFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 1.7V ~ 5.5V | Not Required | 3A | 38mOhm | Non-Inverting | Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-TDFN (1.2x1.6) |
|
|
SIP32461DB-T2-GE1IC PWR SWITCH N-CHAN 1:1 4WCSP |
1,940 |
|
Datasheet | 4-UFBGA, CSPBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.2V ~ 5.5V | Not Required | 1.2A | 50mOhm | Non-Inverting | Slew Rate Controlled | Reverse Current | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WCSP (0.76x0.76) |
|
SLG5NT1533VIC PWR SWITCH N-CHANNEL 1:1 8DFN |
143,640 |
|
Datasheet | 8-UFDFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | - | - | 2.5V ~ 5.5V | 2.5A | 20mOhm | CMOS | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-STDFN (1x1.6) |
|
MIC94084YFT-TRIC PWR SWITCH P-CHAN 1:1 4TMLF |
98,516 |
|
Datasheet | 4-UFDFN, 4-TMLF® | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.7V ~ 5.5V | Not Required | 2A | 67mOhm | Non-Inverting | Slew Rate Controlled | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 4-TMLF® (0.85x0.85) |
|
TPS22976ADPUR2-CH, 5.7-V, 6-A, 14-M, LOAD SWI |
7,786 |
|
Datasheet | 14-PowerWFDFN | - | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 0.6V ~ 5.7V | Not Required | 6A | 14mOhm | - | Load Discharge | Over Temperature | -40°C ~ 105°C (TA) | - | - | Surface Mount | 14-WSON (3x2) |
|
|
SIP4282ADNP3-T1GE4IC PWR SWITCH P-CHAN 1:1 4TDFN |
6,802 |
|
Datasheet | 4-UFDFN Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.5V ~ 5.5V | Not Required | 1.4A | 350mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 4-TDFN (1.2x1.6) |
|
MIC94165YCS-TRIC PWR SWITCH P-CHAN 1:1 6WLCSP |
5,480 |
|
Datasheet | 6-WFBGA, WLCSP | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.7V ~ 5.5V | - | 3A | 14.5mOhm | Non-Inverting | Slew Rate Controlled | Reverse Current | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 6-WLCSP (1x1.5) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
