Power Distribution Switches, Load Drivers
Explore Power Distribution Switches, Load Drivers parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AP22913CN4-7-36IC PWR SWITCH P-CH X1-WLB0909-4 |
2,837 |
|
Datasheet | 4-XFBGA, WLBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.4V ~ 5.5V | Not Required | 2A | 54mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | X1-WLB0909-4 |
|
FPF3688UCX-SN00396IC LOAD SWITCH WLCSP |
4,054 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NCP451AFCCT2GIC PWR SWITCH N-CHAN 1:1 6WLCSP |
2,761 |
|
Datasheet | 6-UFBGA, WLCSP | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.75V ~ 5.5V | Not Required | 3A | 12mOhm | Non-Inverting | Load Discharge | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-WLCSP (1.4x0.9) |
|
|
SLG59M1693CIC PWR SWITCH N-CHAN 1:1 4WLCSP |
4,642 |
|
Datasheet | 4-XFBGA, WLCSP | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.8V ~ 2V | Not Required | 1A | 17.4mOhm | CMOS | Load Discharge | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.75x0.75) |
|
|
SLG59M1720VIC PWR SWITCH N-CHAN 1:1 6STDFN |
1,928 |
|
Datasheet | 6-UFDFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.85V ~ 3.6V | 2.5V ~ 3.6V | 2A | 18mOhm | CMOS | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-STDFN (1x1.4) |
|
|
SLG59M1721VIC PWR SWITCH N-CHAN 1:1 6STDFN |
2,716 |
|
Datasheet | 6-UFDFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.85V ~ 3.6V | 2.5V ~ 3.6V | 2A | 18mOhm | CMOS | Slew Rate Controlled | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-STDFN (1x1.4) |
|
VNL5030S5-EIC DVR LOW-SIDE OMNI III 8SOIC |
2,794 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | OMNIFET III™, VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 36V | 3.5V ~ 5.5V | 25A | 30mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
VNL5090S5-EIC DVR LOW-SIDE OMNI III 8SOIC |
4,823 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | OMNIFET III™, VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 36V | 3.5V ~ 5.5V | 13A | 90mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
MAX14713EWL+CKAIC PMIC BATTERY POWER WLP |
2,735 |
|
Datasheet | 15-WFBGA, WLBGA | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 2:1 | High Side | - | On/Off | - | 1.6V ~ 5.5V | 6A | 11mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 15-WLP (1.22x2.05) |
|
|
BTS410E2E3043BKSA1IC PWR SWITCH HI SIDE TO220-5 |
2,205 |
|
Datasheet | - | * | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MC40XS6500CEKHIGH-SIDE SWITCH 12V PENTA 40MOH |
1,820 |
|
Datasheet | 32-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tube | Obsolete | General Purpose | 5 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 3.9A | 40mOhm | CMOS | Slew Rate Controlled | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 32-SOIC-EP |
|
|
NX30P0121UKAZCOMPANION BACK TO BACK OVP SWITC |
1,485 |
|
Datasheet | 12-UFBGA, WLCSP | NX3 | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | N-Channel | - | 2.5V ~ 20V | Not Required | 3A | 54mOhm | - | - | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 12-WLCSP (1.65x1.25) |
|
MC08XS6421CEKR2HIGH-SIDE SWITCH 12V DUAL 8MOHMS |
4,967 |
|
Datasheet | 54-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 4 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 5.5A, 11A | 8mOhm, 21mOhm | CMOS | - | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 54-HSOP |
|
|
MC08XS6421CEKHIGH-SIDE SWITCH 12V DUAL 8MOHMS |
3,379 |
|
Datasheet | 54-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tube | Obsolete | General Purpose | 4 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 5.5A, 11A | 8mOhm, 21mOhm | CMOS | - | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 54-HSOP |
|
|
MC40XS6500CEKR2HIGH-SIDE SWITCH 12V PENTA 40MOH |
4,994 |
|
Datasheet | 32-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 5 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 3.9A | 40mOhm | CMOS | Slew Rate Controlled | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 32-SOIC-EP |
|
|
MAX14915AFS+IC POWER DRIVER SMD |
1,833 |
|
Datasheet | - | - | Tray | Obsolete | General Purpose | 8 | 1:8 | High Side | - | SPI, Parallel | 10V ~ 36V | 2.5V ~ 5.5V | 1.3A | 120mOhm | - | Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TA) | - | - | - | - |
|
|
FPF2G75FH07BPIC LOAD SWITCH |
1,185 |
|
Datasheet | - | * | Tray | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX16076ATP/V+TGH7LOW-VOLTAGE, HIGH-ACCURACY, QUAD |
3,424 |
|
Datasheet | 20-WFQFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | USB Switch | 1 | 1:1 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 700mA | 60mOhm | Non-Inverting | - | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 85°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-TQFN (4x4) |
|
FPF2144BUFFER/INVERTER PERIPHL DRIVER |
4,569 |
|
Datasheet | 6-VDFN Exposed Pad | - | Bulk | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 400mA | 120mOhm | Non-Inverting | Auto Restart, Power Good, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
AUIPS1011SINTELLIGENT POWER SWITCH |
3,572 |
|
Datasheet | TO-263-3, D2PAK (2 Leads + Tab), TO-263AB | - | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 36V (Max) | Not Required | 6.5A | 10mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | D2PAK |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
