Power Distribution Switches, Load Drivers
Explore Power Distribution Switches, Load Drivers parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LM3544MX-H/NOPBIC PWR SWITCH N-CHAN 1:2 16SOIC |
3,073 |
|
Datasheet | 16-SOIC (0.154", 3.90mm Width) | - | Tape & Reel (TR) | Obsolete | USB Switch | 4 | 1:2 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 500mA | 90mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 16-SOIC |
|
FPF2200IC PWR SWITCH P-CH 1:1 6MICROFET |
1,853 |
|
Datasheet | 6-WDFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 500mA | 140mOhm | Non-Inverting | Auto Restart, Load Discharge, Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
FPF2202IC PWR SWITCH P-CH 1:1 6MICROFET |
3,047 |
|
Datasheet | 6-WDFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 500mA | 140mOhm | Non-Inverting | Load Discharge, Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
BTS52462LAUMA1IC PWR SWITCH N-CHAN 1:1 DSO-12 |
4,678 |
|
Datasheet | 12-BSOP (0.295", 7.50mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 28V | Not Required | 6A | 35mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Adjustable), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-12-9 |
|
|
BTS52352LAUMA1IC PWR SWITCH N-CHAN 1:1 DSO-12 |
1,249 |
|
Datasheet | 12-BSOP (0.295", 7.50mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 28V | Not Required | 3.5A | 45mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-12-9 |
|
BTS52362GSXUMA1IC PWR SWITCH N-CHAN 1:1 DSO-14 |
3,213 |
|
Datasheet | 14-SOIC (0.154", 3.90mm Width) | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 28V | Not Required | 3.2A | 40mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-14-32 |
|
|
BTS52422LAUMA1IC PWR SWITCH N-CHAN 1:1 DSO-12 |
3,319 |
|
Datasheet | 12-BSOP (0.295", 7.50mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 28V | Not Required | 5.5A | 19mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-12-9 |
|
|
BTS52312GSXUMA1IC PWR SWITCH N-CHAN 1:1 DSO-14 |
1,957 |
|
Datasheet | 14-SOIC (0.154", 3.90mm Width) | PROFET® | Tape & Reel (TR) | Obsolete | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 4.5V ~ 28V | Not Required | 1.8A | 140mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-14 |
|
IPS6041PBFIC PWR SWITCH HI SIDE TO220AB |
2,828 |
|
Datasheet | TO-220-5 | - | Tube | Obsolete | - | 1 | - | High Side | - | - | 6V ~ 28V | - | 2.3A | 110mOhm | Non-Inverting | - | - | -40°C ~ 150°C | - | - | Through Hole | TO-220AB (5-LEAD) |
|
IPS7091PBFIC PWR SWITCH HI SIDE TO220AB |
3,267 |
|
Datasheet | TO-220-5 | - | Tube | Obsolete | - | 1 | - | High Side | - | - | 6V ~ 35V | - | 1.5A | 80mOhm | Non-Inverting | - | - | -40°C ~ 150°C | - | - | Through Hole | TO-220AB (5-LEAD) |
|
DRV101FKTWTG3IC PWR DRIVER BIPOLAR 1:1 7DDPAK |
2,853 |
|
Datasheet | TO-263-8, D2PAK (7 Leads + Tab), TO-263CA | - | Tape & Reel (TR) | Obsolete | Relay, Solenoid Driver | 1 | 1:1 | Low Side | Bipolar | On/Off | 9V ~ 60V | Not Required | 1.9A | - | Non-Inverting | Internal PWM, Status Flag | Current Limiting (Fixed), Over Temperature | -55°C ~ 125°C (TA) | - | - | Surface Mount | TO-263 (DDPAK-7) |
_4040233^C.jpg "DRV102TG3")
|
DRV102TG3IC PWR DRVR BIPOLAR 1:1 TO220-7 |
3,463 |
|
Datasheet | TO-220-7 Formed Leads | - | Tube | Obsolete | Relay, Solenoid Driver | 1 | 1:1 | High Side | Bipolar | On/Off | 8V ~ 60V | Not Required | 2A | - | Non-Inverting | Internal PWM, Status Flag | Current Limiting (Fixed), Over Temperature | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-220-7 |
|
TPS2221PWPG4IC PWR SWITCH 3:2 14HTSSOP |
3,759 |
|
Datasheet | 14-PowerTSSOP (0.173", 4.40mm Width) | - | Tube | Obsolete | PCMCIA Switch | 2 | 3:2 | High Side | - | Parallel | 1.8V, 3.3V, 5V | Not Required | 1A | 97mOhm | - | Status Flag | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-HTSSOP |
|
ULN2803ANG4TRANS 8NPN DARL 50V 0.5A 18DIP |
3,405 |
|
Datasheet | 18-DIP (0.300", 7.62mm) | - | Tube | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | -40°C ~ 85°C (TA) | - | - | Through Hole | 18-PDIP |
|
AMIS39101PNPB4RGIC PWR DRIVER 1:8 28SOIC |
4,749 |
|
Datasheet | 28-SOIC (0.295", 7.50mm Width) | - | Tape & Reel (TR) | Obsolete | General Purpose | 8 | 1:8 | High Side | - | SPI | 3.5V ~ 28V | 3.1V ~ 5.5V | 350mA | 1Ohm | - | - | Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-SOIC |
|
IPS7081RTRLPBFIC SWITCH IPS 1CH HI SIDE DPAK |
4,530 |
|
Datasheet | TO-252-5, DPAK (4 Leads + Tab), TO-252AD | - | Cut Tape (CT) | Obsolete | - | 1 | - | High Side | - | - | 6V ~ 35V | - | 2.3A | 55mOhm | Non-Inverting | - | - | -40°C ~ 150°C | - | - | Surface Mount | DPAK-5 |
.jpg "IPS7081STRLPBF")
|
IPS7081STRLPBFIC SWITCH IPS 1CH HI SIDE D2PAK |
3,405 |
|
Datasheet | TO-263-5, D2PAK (4 Leads + Tab), TO-263BB | - | Cut Tape (CT) | Obsolete | - | 1 | - | High Side | - | - | 6V ~ 35V | - | 2.3A | 55mOhm | Non-Inverting | - | - | -40°C ~ 150°C | - | - | Surface Mount | D2PAK (SMD-220 5-Lead) |
|
|
IPS7091STRLPBFIC SWITCH IPS 1CH HI SIDE D2PAK |
2,436 |
|
Datasheet | TO-263-5, D2PAK (4 Leads + Tab), TO-263BB | - | Cut Tape (CT) | Obsolete | - | 1 | - | High Side | - | - | 6V ~ 35V | - | 1.5A | 80mOhm | Non-Inverting | - | - | -40°C ~ 150°C | - | - | Surface Mount | D2PAK (SMD-220 5-Lead) |
|
|
IPS6041STRLPBFIC SWITCH IPS 1CH HI SIDE D2PAK |
4,964 |
|
Datasheet | TO-263-5, D2PAK (4 Leads + Tab), TO-263BB | - | Cut Tape (CT) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 6V ~ 28V | Not Required | 2.3A | 110mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | D2PAK (SMD-220 5-Lead) |
|
IPS1041RTRLPBFIC PWR SWITCH N-CHANNEL 1:1 DPAK |
4,512 |
|
Datasheet | TO-252-3, DPAK (2 Leads + Tab), SC-63 | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 28V (Max) | Not Required | 2.2A | 80mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | TO-252AA (DPAK) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
