Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VB025MSP6IC PWR DRIVER COIL 380V PWRSO10 |
2,353 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tube | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 10-PowerSO |
|
L9822N013TRIC PWR DRIVER 1:8 PWRSO20 |
3,840 |
|
Datasheet | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | - | Tape & Reel (TR) | Obsolete | Relay, Solenoid Driver | 8 | 1:8 | Low Side | - | SPI | 4.5V ~ 5.5V | - | 500mA | 550mOhm | - | Status Flag | - | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PowerSO-20 |
|
|
VBG15NB22T5SPIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
4,560 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | On/Off | 250V (Max) | 14V | 17A | - | - | - | - | -40°C ~ 175°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
E-L9823IC PWR DRIVER N-CHANNEL 1:8 24SO |
1,185 |
|
Datasheet | 24-SOIC (0.295", 7.50mm Width) | - | Tube | Active | General Purpose | 8 | 1:8 | Low Side | N-Channel | SPI | 4.5V ~ 5.5V | - | 500mA | 800mOhm | - | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 24-SO |
|
|
VB025MSP613TRIC PWR DRIVER COIL 380V PWRSO10 |
4,868 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 10-PowerSO |
|
TDE1767DPIC PWR DRIVER BIPOLAR 1:1 8DIP |
2,928 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Tube | Obsolete | Relay, Solenoid Driver | 1 | 1:1 | High Side | Bipolar | On/Off | 6V ~ 45V | Not Required | 1.2A | - | Inverting, Non-Inverting | - | Current Limiting (Adjustable), Over Temperature | -25°C ~ 85°C (TA) | - | - | Through Hole | 8-DIP |
|
|
VBG15NB22T5SPTRIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
4,742 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | On/Off | 250V (Max) | 14V | 17A | - | - | - | - | -40°C ~ 175°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
|
VBG15NB22T5TR-EIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
2,797 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | On/Off | 250V (Max) | 14V | 17A | - | - | - | - | -40°C ~ 175°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
|
L9822NIC PWR DRIVER 1:8 PWRSO20 |
4,411 |
|
Datasheet | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | - | Tube | Obsolete | Relay, Solenoid Driver | 8 | 1:8 | Low Side | - | SPI | 4.5V ~ 5.5V | - | 500mA | 550mOhm | - | Status Flag | - | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PowerSO-20 |
|
VNW50N04IC PWR DRIVER N-CHAN 1:1 TO247-3 |
1,630 |
|
Datasheet | TO-247-3 | OMNIFET™, VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 35V (Max) | Not Required | 35A | 12mOhm (Max) | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage | - | - | - | Through Hole | TO-247-3 |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
