Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VB025MSP13TRIC PWR DRVR COIL 380V PWRSO10 |
4,576 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 10-PowerSO |
|
|
VNQ690SPIC PWR DRIVER N-CHAN 1:1 PWRSO10 |
3,573 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tube | Obsolete | General Purpose | 4 | 1:1 | High Side | N-Channel | On/Off | 6V ~ 36V | Not Required | 10A | 90mOhm (Max) | Non-Inverting | Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
L9347LF-TRIC PWR DRIVER N-CHAN 1:1 PWRSO36 |
2,350 |
|
Datasheet | 36-PowerBSSOP (0.433", 11.00mm Width) | - | Tape & Reel (TR) | Obsolete | General Purpose | 4 | 1:1 | Low Side | N-Channel | On/Off | 4.8V ~ 18V | Not Required | 2.5A, 5A | - | Non-Inverting | Status Flag | Open Load Detect, Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PowerSO-36, Bottom Pad |
|
|
VNQ860SPIC PWR DRIVER N-CHAN 1:1 PWRSO10 |
2,036 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | VIPower™ | Tube | Obsolete | General Purpose | 4 | 1:1 | High Side | N-Channel | On/Off | 5.5V ~ 36V | Not Required | 250mA | 270mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
VN31(012Y)IC PWR DRVR N-CH 1:1 5PENTAWATT |
2,704 |
|
Datasheet | Pentawatt-5 (Straight Leads, Staggered Depth) | - | Tube | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 5.5V ~ 26V | Not Required | 31A | 30mOhm (Max) | Non-Inverting | Status Flag | Open Load Detect, Over Temperature | -40°C ~ 150°C (TJ) | - | - | Through Hole | 5-PENTAWATT |
|
TDE1898RDPIC PWR DRVR N-CHAN 1:1 8MINIDIP |
2,500 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Tube | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 18V ~ 35V | Not Required | 500mA | - | Differential | - | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO | -25°C ~ 85°C (TA) | - | - | Through Hole | 8-Mini DIP |
|
|
VB525SP-EIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
3,078 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | On/Off | 4.5V ~ 5.5V | - | 9A | - | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
VNQ6040STR-EIC PWR DRVR N-CHAN 1:1 PWRSSO36 |
1,043 |
|
Datasheet | 36-PowerBFSOP (0.295", 7.50mm Width) | VIPower™ | Tape & Reel (TR) | Active | General Purpose | 4 | 1:1 | High Side | N-Channel | SPI | 5V ~ 28V | - | 25A | 35mOhm | - | Auto Restart | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PowerSSO-36 EPD |
|
VB921ZVFIIC PWR DRVR BIPLR 1:1 ISOWATT220 |
2,982 |
|
Datasheet | ISOWATT-220-3 | VIPower™ | Tube | Obsolete | Relay, Solenoid Driver | 1 | 1:1 | - | Bipolar | - | 4.2V ~ 5.5V | - | 7.5A | - | - | - | - | -40°C ~ 150°C (TJ) | - | - | Through Hole | ISOWATT-220 |
|
|
VB326SPIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
2,781 |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | Parallel | 30V (Max) | 4.5V ~ 5.5V | 11A | - | Non-Inverting | Status Flag | Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 10-PowerSO |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
