Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FDZ4010IC PWR SWITCH P-CHAN 1:1 6WLCSP |
4,960 |
|
Datasheet | 6-UFBGA, WLCSP | - | Bulk | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | - | 2V ~ 5V | 10mA | 1.5Ohm (Max) | Non-Inverting | - | - | -40°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (1.16x0.76) |
|
FPF2165_SBAA013IC PWR IC P-CHAN 1:1 6MICROFET |
3,670 |
|
Datasheet | 6-WDFN Exposed Pad | - | Bulk | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.5A | 95mOhm | Non-Inverting | Status Flag | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
|
FPF1013_PIC LOAD SWITCH 1V ADVANCE 6WLCSP |
2,470 |
|
Datasheet | - | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NCP81391AMNTXGIC PWR DRIVER N-CHAN 1:1 31QFN |
3,740 |
|
Datasheet | 34-PowerVFQFN | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side or Low Side | N-Channel | Logic | 20V | 4.5V ~ 13.2V | 65A | 1.7mOhm, 2mOhm | Non-Inverting | PWM Input | Over Temperature, UVLO | -40°C ~ 100°C (TA) | - | - | Surface Mount | 31-QFN (5x5) |
|
FDG6323L-F169IC PWR DRIVER P-CHANNEL 1:1 SC88 |
4,155 |
|
Datasheet | 6-TSSOP, SC-88, SOT-363 | - | Bulk | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 2.5V ~ 8V | 1.5V ~ 8V | - | 410mOhm | Non-Inverting | Slew Rate Controlled | - | -55°C ~ 150°C (TJ) | - | - | Surface Mount | SC-70-6 |
|
NCV8405BDTRKGIC DRIVER LOW SIDE DPAK-3 |
1,557 |
|
Datasheet | TO-252-3, DPAK (2 Leads + Tab), SC-63 | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 42V (Max) | Not Required | 6A | 90mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | Automotive | AEC-Q101 | Surface Mount | DPAK |
|
|
NID9N05BCLT4GMOSFET N-CH 52V 9A LL DPAK-3 |
4,189 |
|
Datasheet | TO-252-3, DPAK (2 Leads + Tab), SC-63 | - | Tape & Reel (TR) | Obsolete | Relay, Solenoid Driver | 1 | 1:1 | Low Side | N-Channel | On/Off | 52V (Max) | Not Required | 9A | 90mOhm | Non-Inverting | - | Over Voltage | -55°C ~ 175°C (TJ) | Automotive | AEC-Q101 | Surface Mount | DPAK |
|
|
FPF2388UCXIC LOAD SW 2CH ADJ CURR 8-MLP |
1,894 |
|
Datasheet | - | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | - |
|
|
FPF3688UCX-SN00396IC LOAD SWITCH WLCSP |
4,054 |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NCP451AFCCT2GIC PWR SWITCH N-CHAN 1:1 6WLCSP |
2,761 |
|
Datasheet | 6-UFBGA, WLCSP | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.75V ~ 5.5V | Not Required | 3A | 12mOhm | Non-Inverting | Load Discharge | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-WLCSP (1.4x0.9) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
