Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FPF2303MXDUAL OUTPUT CURRENT LIMIT SWITCH |
7,500 |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
FPF2102Power Supply Support Circuit, Fi |
2,995 |
|
Datasheet | SC-74A, SOT-753 | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 6V | 1.8V ~ 5.5V | 400mA | 125mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
NCV8406ADTRKGBuffer/Inverter Based Peripheral |
3,234 |
|
Datasheet | TO-252-3, DPAK (2 Leads + Tab), SC-63 | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 60V | Not Required | 7A | 185mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Over Temperature, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | DPAK |
|
LB1205-EHIGH-VOLTAGE, HIGH-CURRENT DARLI |
26,000 |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
FPF2124Buffer/Inverter Based Peripheral |
2,460 |
|
Datasheet | SC-74A, SOT-753 | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.5A | 125mOhm | Non-Inverting | Auto Restart, Load Discharge | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
NFVA23512NP2TIC PWR N-CH 1:1 SPMCA-A34 |
2,292 |
|
Datasheet | 34-PowerDIP Module (1.480", 37.60mm) | - | Tube | Active | General Purpose | 1 | 1:1 | - | N-Channel | - | - | - | 35A | - | - | - | - | - | - | - | Through Hole | SPMCA-A34 |
|
FPF1208UCXIC LOAD SWITCH ADV 4WLCSP |
192 |
|
Datasheet | - | * | Cut Tape (CT) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
FPF1003AIC PWR SWITCH P-CHAN 1:1 6WLCSP |
3,798 |
|
Datasheet | 6-UFBGA, WLCSP | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.2V ~ 5.5V | Not Required | 2A | 20mOhm | Non-Inverting | Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-WLCSP (0.96x1.66) |
|
|
FPF2107IC PWR SWITCH P-CHAN 1:1 SOT23-5 |
2,000 |
|
Datasheet | SC-74A, SOT-753 | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 400mA | 125mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
GF001HNIC PWR SWITCH P-CHAN 2:1 8MDIP |
2,887 |
|
Datasheet | 8-DIP (0.300", 7.62mm) | FPS™ | Tube | Obsolete | General Purpose | 1 | 2:1 | High Side | P-Channel | USB | 2.3V ~ 5.5V | 2.5V ~ 25V | 2.7A | 95mOhm | Differential | Slew Rate Controlled | Reverse Current | -40°C ~ 105°C | - | - | Through Hole | 8-DIP |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
