Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NDC3105LT1GIC PWR DRIVER SOT23-3 |
2,774 |
|
Datasheet | TO-236-3, SC-59, SOT-23-3 | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | SOT-23-3 (TO-236) |
|
FPF1206UCX-ONINTELLIMAX ULTRA-SMALL, SLEW-RAT |
13,808 |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
NCP434FCT2GIC PWR SWITCH P-CHAN 1:1 4WLCSP |
1,317 |
|
Datasheet | 4-UFBGA, WLCSP | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1V ~ 3.6V | Not Required | 2A | 65mOhm | Non-Inverting | Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.96x0.96) |
|
|
NCP439FCT2GIC PWR SWITCH P-CHAN 1:1 4WLCSP |
1,264 |
|
Datasheet | 4-UFBGA, WLCSP | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1V ~ 3.6V | Not Required | 2A | 27mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.96x0.96) |
|
MDC3105DMT1GIC PWR DRIVER BIPOLAR 1:1 SC74 |
1,372 |
|
Datasheet | SC-74, SOT-457 | - | Tape & Reel (TR) | Obsolete | Relay, Solenoid Driver | 2 | 1:1 | Low Side | Bipolar | On/Off | 6V (Max) | Not Required | 500mA | - | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | SC-74 |
|
NCP45522IMNTWG-HIC PWR SWITCH N-CHAN 1:1 8DFN |
2,066 |
|
Datasheet | 8-VFDFN Exposed Pad | ecoSWITCH™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | - | N-Channel | - | 0.5V ~ 13.5V | 3V ~ 5.5V | 6A | 21.9mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-DFN (2x2) |
|
FPF2005FULL FUNCTION LOAD SWITCHES |
1,261 |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
NCP338FCCT2GIC PWR SWITCH P-CHAN 1:1 6WLCSP |
1,214 |
|
Datasheet | 6-UFBGA, WLCSP | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1V ~ 3.6V | Not Required | 2A | 16mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 6-WLCSP (.8x1.2) |
|
FPF2143IC PWR SWITCH P-CH 1:1 6MICROFET |
2,874 |
|
Datasheet | 6-WDFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 200mA | 120mOhm | Non-Inverting | Power Good, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
FDG6324LBUFFER/INVERTER BASED PERIPHERAL |
61,483 |
|
Datasheet | 6-TSSOP, SC-88, SOT-363 | - | Bulk | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 3V ~ 20V | Not Required | 600mA | 370mOhm | Non-Inverting | Slew Rate Controlled | - | -55°C ~ 150°C (TJ) | - | - | Surface Mount | SC-88 (SC-70-6) |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
