Power Distribution Switches, Load Drivers
Explore Power Distribution Switches, Load Drivers parts from multiple manufacturers, with model information, availability, datasheets and technical specifications for engineering and purchasing.
For parts that are not shown in the list, send the manufacturer part number, quantity or BOM to JIEXIN Electronics. Our team can assist with availability checks and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
DRF1300IC PWR SWITCH N-CHANNEL 1:1 |
4,399 |
|
Datasheet | 18-Module | - | Tray | Active | General Purpose | 2 | 1:1 | Low Side | N-Channel | On/Off | 10V ~ 15V | - | 30A | 240mOhm | Inverting, Non-Inverting | - | - | - | - | - | Chassis Mount | - |
|
SIP4282DVP3-T1GE3IC PWR SWITCH P-CHAN 1:1 PWRPAK |
1,171 |
|
Datasheet | PowerPAK® SC-75-6L | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.4A | 105mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | PowerPAK® SC-75-6L |
|
TPS22913CYZVTIC PWR SWITCH P-CHAN 1:1 4DSBGA |
1,182 |
|
Datasheet | 4-XFBGA, DSBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.4V ~ 5.5V | Not Required | 2A | 60mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-DSBGA (0.88x0.88) |
|
LS0504EDD125V, 4A LOW RON LOAD SWITCH |
354 |
|
Datasheet | 4-UDFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 4A | 26mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Over Temperature, Over Voltage, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 4-DFN (1.2x1.6) |
|
LM34902ITM/NOPBIC PWR SWITCH N-CHAN 1:1 6DSBGA |
919 |
|
Datasheet | 6-WFBGA, DSBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 2.8V ~ 5.3V | Not Required | 300mA | 640mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-DSBGA |
|
AP22804BM8-13IC PWR SWITCH P-CHAN 1:1 8MSOP |
2,384 |
|
Datasheet | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 2.5A | 50mOhm | Non-Inverting | Load Discharge, Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-MSOP |
|
TPS22924BYZTIC PWR SWITCH N-CHAN 1:1 6DSBGA |
1,079 |
|
Datasheet | 6-XFBGA, DSBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.75V ~ 3.6V | Not Required | 2A | 18.3mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-DSBGA |
|
BD82061FVJ-E2IC PWR SWITCH N-CHAN 1:1 8TSSOP |
4,577 |
|
Datasheet | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 1.5A | 70mOhm | Non-Inverting | Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TSSOP-BJ |
|
|
BD82004FVJ-MGE2IC PWR SWITCH N-CHAN 1:1 8TSSOP |
4,037 |
|
Datasheet | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 2A | 70mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TSSOP-BJ |
|
|
BD82000FVJ-LBE2IC PWR SWITCH N-CHAN 1:1 8TSSOP |
3,757 |
|
Datasheet | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | - | Tape & Reel (TR) | Active | USB Switch | 1 | 1:1 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 1A | 70mOhm | Non-Inverting | Slew Rate Controlled, Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TSSOP-BJ |
|
BV1LA025EFJ-CE2AUTOMOTIVE IPD 1CH LOW SIDE SWIT |
3,253 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | Low Side | P-Channel | On/Off | -0.3V ~ 42V | 3.5V ~ 5.5V | 13A | 25mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 8-HTSOP-J |
|
BD2069FJ-MGE2IC PWR SWITCH N-CHAN 1:2 SOP-J8 |
2,909 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | - | Tape & Reel (TR) | Active | USB Switch | 2 | 1:2 | High Side | N-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 3A | 80mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SOP-J |
|
LTC1470ES8#PBFIC PWR SWITCH N-CHAN 2:1 8SOIC |
4,701 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | - | Tube | Active | PCMCIA Switch | 1 | 2:1 | High Side | N-Channel | On/Off | 3.3V, 5V | Not Required | 1A | 140mOhm | - | Slew Rate Controlled | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SO |
|
LMG3410R150RWHTSMART 150MOHM GAN FET WITH DRIVE |
3,572 |
|
Datasheet | 32-VQFN Exposed Pad | - | Tape & Reel (TR) | Active | Load Switch | 1 | 1:1 | High Side | N-Channel | Logic, PWM | 480V (Max) | 9.5V ~ 18V | 6A | 150mOhm | Non-Inverting | Bootstrap Circuit, 5V Regulated Output | Over Current, Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 32-VQFN (8x8) |
|
|
LMG3411R150RWHTSMART 150MOHM GAN FET WITH DRIVE |
4,946 |
|
Datasheet | 32-VQFN Exposed Pad | - | Tape & Reel (TR) | Active | Load Switch | 1 | 1:1 | High Side | N-Channel | Logic, PWM | 480V (Max) | 9.5V ~ 18V | 6A | 150mOhm | Non-Inverting | Bootstrap Circuit, 5V Regulated Output | Over Current, Over Temperature, UVLO | -40°C ~ 125°C (TJ) | - | - | Surface Mount | 32-VQFN (8x8) |
|
LTC1478CS#PBFIC PWR SWITCH 1:1 16SOIC |
1,213 |
|
Datasheet | 16-SOIC (0.154", 3.90mm Width) | - | Tube | Active | General Purpose | 2 | 1:1 | High Side | - | On/Off | 2.7V ~ 5.5V | Not Required | 1A | 70mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SO |
|
|
NFVA23512NP2TIC PWR N-CH 1:1 SPMCA-A34 |
2,292 |
|
Datasheet | 34-PowerDIP Module (1.480", 37.60mm) | - | Tube | Active | General Purpose | 1 | 1:1 | - | N-Channel | - | - | - | 35A | - | - | - | - | - | - | - | Through Hole | SPMCA-A34 |
|
DRF1200IC PWR SWITCH N-CHANNEL 1:1 |
4,234 |
|
Datasheet | - | - | Tray | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 10V ~ 15V | - | 13A | 900mOhm | Inverting, Non-Inverting | - | - | - | - | - | - | - |
.jpg "FBS-GAM01P-C-PSE")
|
FBS-GAM01P-C-PSESINGLE LOW SIDE DRIVER |
4,865 |
|
Datasheet | 9-SMD Module | eGaN® | Bulk | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | - | - | 4.75V ~ 5.25V | - | 2.5Ohm | Non-Inverting | Power Good | Over Voltage, UVLO | -40°C ~ 85°C | - | - | Surface Mount | - |
|
DRF1400IC PWR SWITCH N-CHANNEL 1:1 |
1,265 |
|
Datasheet | Module | - | Tray | Active | General Purpose | 2 | 1:1 | Low Side | N-Channel | On/Off | 8V ~ 15V | - | 30A | 240mOhm | Inverting, Non-Inverting | - | - | - | - | - | Chassis Mount | - |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
