Power Distribution Switches, Load Drivers
Review Power Distribution Switches, Load Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLE824533SAAUMA1IC PWR DRIVER N-CHAN 1:3 DSO-36 |
1,551 |
|
Datasheet | 36-BSSOP (0.433", 11.00mm Width) Exposed Pad | - | Tape & Reel (TR) | Not For New Designs | Relay, Solenoid Driver | 3 | 1:3 | High Side or Low Side | N-Channel | SPI | 8V ~ 17V | 4.75V ~ 5.25V | 1.5A | 250mOhm (Max) | - | Status Flag | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-DSO-36-54 |
|
BTS3080TFATMA1IC PWR SWITCH N-CHAN 1:1 TO252-3 |
2,244 |
|
Datasheet | TO-252-3, DPAK (2 Leads + Tab), SC-63 | HITFET® | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 40V (Max) | Not Required | 3A | 69mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-TO252-3 |
|
BTG70901EPLXUMA1PROFET |
4,321 |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET™ Load Guard | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | - | 2.7V ~ 28V | 2.7V ~ 28V | 2A | 90mOhm | Non-Inverting | Slew Rate Controlled | Current Limiting (Fixed), Over Load, Over Temperature, Over Voltage, Reverse Battery, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-TSDSO-14 |
|
BTF3080EJXUMA1IC PWR SWITCH N-CHAN 1:1 TDSO-8 |
2,562 |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | Low Side | N-Channel | PWM | 3V ~ 28V | 3V ~ 5.5V | 3A | 71mOhm | Non-Inverting | - | Over Current, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-TDSO-8-31 |
|
|
BTS70902EPLXUMA1SMART HIGH-SIDE POWER SWITCH |
2,122 |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | High Side | N-Channel | Logic | 2.7V ~ 28V | 2.7V ~ 28V | - | 90mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-TSDSO-14-22 |
|
|
BTS71202EPGXUMA1PROFET |
3,317 |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 2 | 1:1 | High Side | N-Channel | Logic | 3.1V ~ 18V | 3.1V ~ 18V | 2A | 61mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Open Load Detect, Over Temperature, Over Voltage, Reverse Battery, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-TSDSO-14 |
|
|
BTG70501EPLXUMA1IC PWR SWITCH N-CHAN 1:1 14TSSOP |
2,850 |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET™ Load Guard | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | - | 2.7V ~ 28V | 2.7V ~ 28V | 3A | 50mOhm | Non-Inverting | Slew Rate Controlled | Current Limiting (Fixed), Over Load, Over Temperature, Over Voltage, Reverse Battery, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PG-TSDSO-14 |
|
BTS41K0SMENHUMA1IC PWR SWTCH N-CHAN 1:1 SOT223-4 |
5,395 |
|
Datasheet | TO-261-4, TO-261AA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 60V (Max) | Not Required | - | 800mOhm | - | Auto Restart | Over Temperature, Over Voltage | -40°C ~ 150°C (TJ) | Automotive | - | Surface Mount | PG-SOT223-4 |
|
|
BTS70802EPZXUMA1PROFET PG-TSDSO-14 |
2,400 |
|
Datasheet | 14-SOIC (0.154", 3.90mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Active | General Purpose | 2 | 1:1 | High Side | N-Channel | On/Off | 6V ~ 18V | Not Required | 3A | 20.9mOhm | Non-Inverting | Slew Rate Controlled | Over Current, Over Temperature, Over Voltage, Short Circuit | -40°C ~ 175°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-TDSO-14-11 |
|
|
BTS70302EPGXUMA1PROFET |
2,889 |
|
Datasheet | 14-TSSOP (0.154", 3.90mm Width) Exposed Pad | PROFET® | Tape & Reel (TR) | Active | Relay, Solenoid Driver | 2 | 1:1 | High Side | N-Channel | Logic | 3.1V ~ 18V | 3.1V ~ 18V | 4.5A | 13.5mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Current Limiting (Adjustable), Open Load Detect, Over Temperature, Over Voltage, Reverse Battery, Short Circuit, UVLO | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | PG-TSDSO-14 |
Frequently Asked Questions
What are Power Distribution Switches, Load Drivers components used for?
Power Distribution Switches, Load Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Power Distribution Switches, Load Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
