LED Drivers
Review LED Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Topology | Internal Switch(s) | Number of Outputs | Voltage - Supply (Min) | Voltage - Supply (Max) | Voltage - Output | Current - Output / Channel | Frequency | Dimming | Applications | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
BD1603NUV-E2IC LED DRVR RGLTR VSON010V3030 |
4,891 |
|
Datasheet | - | 10-VFDFN Exposed Pad | Tape & Reel (TR) | Not For New Designs | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 1 | 2.7V | 5.5V | 4.5V | 190mA | 238kHz, 642kHz | - | Backlight | -30°C ~ 85°C (TA) | - | - | Surface Mount | VSON010V3030 |
|
BD8115F-MTE2IC LED DRIVER LINEAR 40MA 16SOP |
1,814 |
|
Datasheet | - | 16-SOIC (0.173", 4.40mm Width) | Tape & Reel (TR) | Not For New Designs | Linear | Shift Register | Yes | 8 | 4.5V | 5.5V | - | 40mA | 1.25MHz | - | - | -40°C ~ 105°C (TA) | - | - | Surface Mount | 16-SOP |
|
BD6067GU-E2IC LED DRVR RGLTR PWM VCSP85H1 |
4,919 |
|
Datasheet | - | 8-VFBGA, CSPBGA | Tape & Reel (TR) | Not For New Designs | DC DC Regulator | Step-Up (Boost) | Yes | 1 | 2.7V | 5.5V | 30V | 20mA | 1MHz | PWM | Backlight, Camera Flash | -30°C ~ 85°C (TA) | - | - | Surface Mount | VCSP85H1 |
|
BH6046KN-E2IC LED DRIVER REGULATOR 36VQFN |
1,407 |
|
Datasheet | - | 36-VFQFN | Tape & Reel (TR) | Obsolete | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 9 | 3.1V | 4.5V | 4.5V | 16mA, 24mA, 60mA, 150mA | - | - | Backlight | - | - | - | Surface Mount | 36-VQFN (6x6) |
|
BD8105FV-E2IC LED DRIVER LINEAR 20MA 20SSOP |
4,073 |
|
Datasheet | - | 20-SSOP (0.240", 6.10mm Width) | Tape & Reel (TR) | Not For New Designs | Linear | - | - | 12 | 4.5V | 5.5V | 35V | 20mA | 1MHz | - | - | -40°C ~ 105°C (TA) | - | - | Surface Mount | 20-SSOP-B |
|
BD6590MUV-E2IC LED DRV CTRLR PWM 24VQFN |
1,609 |
|
Datasheet | - | 24-VFQFN Exposed Pad | Tape & Reel (TR) | Not For New Designs | DC DC Controller | Step-Up (Boost) | No | 6 | 4.5V | 5.5V | 40V | 30mA | 1.5MHz | Analog, PWM | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | VQFN020V4040 |
|
|
BD81A04EFV-ME2IC LED DRIVER CTRLR PWM 120MA |
3,799 |
|
Datasheet | - | - | Tape & Reel (TR) | Not For New Designs | DC DC Controller | Step-Down (Buck), Step-Up (Boost) | No | 4 | 4.5V | 35V | - | 120mA | 200kHz ~ 2.2MHz | PWM | Backlight | -40°C ~ 125°C (TA) | - | - | - | - |
|
BD8108FM-E2IC LED DRIVER CTRLR PWM 28HSOP |
2,983 |
|
Datasheet | - | 28-SOP (0.295", 7.50mm Width) + 2 Heat Tabs | Tape & Reel (TR) | Not For New Designs | DC DC Controller | Step-Up (Boost) | No | 4 | 4.5V | 30V | 36V | - | - | Analog, PWM | Backlight | -40°C ~ 95°C (TA) | - | - | Surface Mount | 28-HSOP-M |
|
BD7844AEFV-E2IC LED DRVR LINEAR 80MA 28HTSSOP |
1,889 |
|
Datasheet | - | 28-VSSOP (0.173", 4.40mm Width) Exposed Pad | Tape & Reel (TR) | Not For New Designs | Linear | - | Yes | 16 | 4.5V | 5.5V | 20V | 80mA | - | - | Signage | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-HTSSOP-B |
|
BD8113EFV-E2IC LED DRVR CTRLR PWM 24HTSSOP |
2,289 |
|
Datasheet | - | 24-VSSOP (0.220", 5.60mm Width) Exposed Pad | Tape & Reel (TR) | Not For New Designs | DC DC Controller | Step-Down (Buck), Step-Up (Boost) | No | 2 | 5V | 30V | 36V | 150mA | - | Analog, PWM | Backlight | -40°C ~ 105°C (TA) | - | - | Surface Mount | 24-HTSSOP-B |
Frequently Asked Questions
What are LED Drivers components used for?
LED Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right LED Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find LED Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
