LED Drivers
Review LED Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Topology | Internal Switch(s) | Number of Outputs | Voltage - Supply (Min) | Voltage - Supply (Max) | Voltage - Output | Current - Output / Channel | Frequency | Dimming | Applications | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
CAT37TDI-GT3IC LED DRVR RGLTR PWM TSOT23-5 |
2,550 |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Obsolete | DC DC Regulator | Step-Up (Boost) | Yes | 1 | 2.5V | 7V | 20V | 40mA | 1.2MHz | Analog, PWM | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | TSOT-23-5 |
|
NCP5612MUTBGIC LED DRVR RGLTR ANALOG 12LLGA |
1,326 |
|
Datasheet | - | 12-UFLGA Exposed Pad | Tape & Reel (TR) | Obsolete | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 2 | 2.7V | 5.5V | 4.8V ~ 5.7V | 30mA | 1MHz | Analog | Backlight, Camera Flash | -40°C ~ 85°C (TA) | - | - | Surface Mount | 12-LLGA (2x2) |
|
CAT3637HV3-GT2IC LED DRV RGLT MULT-STEP 16TQFN |
1,705 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 6 | 2.5V | 5.5V | 7V | 30mA | 800kHz ~ 1.1MHz | Multi-Step | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-TQFN (3x3) |
|
NCP5010FCT1GIC LED DRV RGLT ANALOG 8FLIPCHIP |
3,585 |
|
Datasheet | - | 8-UFBGA, FCBGA | Tape & Reel (TR) | Obsolete | DC DC Regulator | Step-Up (Boost) | Yes | 1 | 2.7V | 5.5V | - | 560mA (Switch) | 1MHz | Analog | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-FlipChip (1.7x1.7) |
|
NCV3066PGIC LED DRVR RGLTR PWM 1.5A 8DIP |
1,030 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | DC DC Regulator | Step-Down (Buck), Step-Up (Boost) | Yes | 1 | 3V | 40V | - | 1.5A (Switch) | 150kHz | Analog, PWM | Lighting | -40°C ~ 125°C (TJ) | - | - | Through Hole | 8-PDIP |
|
NCP5603MNR2GIC LED DRV RGLTR PWM 200MA 10DFN |
1,262 |
|
Datasheet | - | 10-VFDFN Exposed Pad | Tape & Reel (TR) | Obsolete | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 1 | 2.7V | 5.5V | 4.75V ~ 5.25V | 200mA | - | PWM | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | 10-DFN (3x3) |
|
CAT3626HV4-T2IC LED DRVR WT/RGB BCKLGT 16TQFN |
4,472 |
|
Datasheet | - | 16-WQFN Exposed Pad | Tape & Reel (TR) | Obsolete | - | Switched Capacitor (Charge Pump) | - | 6 | 3V | 5.5V | 7V | 32mA | 800kHz ~ 1.3MHz | - | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-TQFN (4x4) |
|
LV52204MUTBGIC LED DRV RGLTR PWM 700MA 6UDFN |
4,605 |
|
Datasheet | - | 6-UDFN Exposed Pad | Tape & Reel (TR) | Obsolete | DC DC Regulator | Step-Up (Boost) | Yes | 1 | 2.7V | 5.5V | - | 700mA (Switch) | 600kHz | PWM, Single-Wire | Backlight | -30°C ~ 85°C (TA) | - | - | Surface Mount | 6-UDFN (2x2) |
|
NCP5604AMTR2GIC LED DRV RGLTR PWM 100MA 16QFN |
4,611 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tape & Reel (TR) | Obsolete | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 4 | 2.7V | 5.5V | 4.8V ~ 6V | 100mA | 1MHz | Analog, PWM | Backlight, Camera Flash | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-QFN (3x3) |
|
LV5029MD-BHIC LED DRIVER OFFL PWM 10SOIC |
2,363 |
|
Datasheet | - | 10-SOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | AC DC Offline Switcher | - | No | 1 | 8.5V | 24V | - | - | 50kHz | Analog, PWM | - | -30°C ~ 125°C (TJ) | - | - | Surface Mount | 10-SOIC |
Frequently Asked Questions
What are LED Drivers components used for?
LED Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right LED Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find LED Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
