LED Drivers
Review LED Drivers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Topology | Internal Switch(s) | Number of Outputs | Voltage - Supply (Min) | Voltage - Supply (Max) | Voltage - Output | Current - Output / Channel | Frequency | Dimming | Applications | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX16818ATI+TIC LED DRIVER CTRLR PWM 28TQFN |
2,570 |
|
Datasheet | - | 28-WFQFN Exposed Pad | Tape & Reel (TR) | Active | DC DC Controller | SEPIC, Step-Down (Buck), Step-Up (Boost) | No | 1 | 4.75V | 28V | - | - | 125kHz ~ 1.5MHz | PWM | Backlight | -40°C ~ 125°C (TA) | - | - | Surface Mount | 28-TQFN (5x5) |
|
|
MAX16818ETI+TIC LED DRIVER CTRLR PWM 28TQFN |
2,226 |
|
Datasheet | - | 28-WFQFN Exposed Pad | Tape & Reel (TR) | Active | DC DC Controller | SEPIC, Step-Down (Buck), Step-Up (Boost) | No | 1 | 4.75V | 28V | - | - | 125kHz ~ 1.5MHz | PWM | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-TQFN (5x5) |
|
MAX1577ZETA+TIC LED DRV RGLTR PWM 800MA 8TDFN |
2,422 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Active | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 1 | 2.7V | 5.5V | 5.1V | 800mA | 1MHz | PWM | Backlight, Camera Flash | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TDFN (3x3) |
|
MAX8631YETI+WIC LED DRV RGLTR SGL WR 28TQFN |
3,182 |
|
Datasheet | - | 28-WFQFN Exposed Pad | Tube | Active | DC DC Regulator | Switched Capacitor (Charge Pump) | Yes | 8 + 2LDOs | 2.7V | 5.5V | 5V | 30mA, 100mA (Flash) | 1MHz | Single-Wire | Backlight, Camera Flash | -40°C ~ 85°C (TA) | - | - | Surface Mount | 28-TQFN (4x4) |
|
MAX6977AAE+TIC LED DRIVER LINEAR 55MA 16SSOP |
1,221 |
|
Datasheet | - | 16-SSOP (0.209", 5.30mm Width) | Tape & Reel (TR) | Active | Linear | Shift Register | Yes | 8 | 3V | 5.5V | 5.5V | 55mA | - | - | Lighting, Signage | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-SSOP |
|
|
MAX8596ZETA+TIC LED DRVR RGLTR PWM 25MA 8TDFN |
3,562 |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Obsolete | DC DC Regulator | Step-Up (Boost) | Yes | 1 | 2.6V | 5.5V | 32V | 25mA | 1MHz | Analog, PWM | Backlight | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-TDFN (3x3) |
|
MAX16831ATJ+IC LED DRIVER CTRLR PWM 32TQFN |
2,009 |
|
Datasheet | - | 32-WFQFN Exposed Pad | Tube | Active | DC DC Controller | Step-Down (Buck), Step-Up (Boost) | No | 1 | 5.5V | 76V | - | - | 125kHz ~ 600kHz | Analog, PWM | Lighting | -40°C ~ 125°C (TA) | Automotive | - | Surface Mount | 32-TQFN (5x5) |
|
MAX7302ATE+IC LED DRIVER LINEAR 25MA 16TQFN |
2,551 |
|
Datasheet | - | 16-WFQFN Exposed Pad | Tube | Obsolete | Linear | - | - | 9 | 1.62V | 3.6V | - | 25mA | 1MHz | - | Backlight | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-TQFN (3x3) |
|
MAX6970AUE+TIC LED DRVR LINEAR 55MA 16TSSOP |
3,417 |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) Exposed Pad | Tape & Reel (TR) | Active | Linear | Shift Register | Yes | 8 | 3V | 5.5V | 36V | 55mA | - | - | Lighting, Signage | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-TSSOP-EP |
|
MAX7307AUB+TIC LED DRVR LIN I2C 25MA 10UMAX |
4,430 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | Linear | - | - | 4 | 1.62V | 3.6V | - | 25mA | 1MHz | I2C | Backlight | -40°C ~ 125°C (TA) | - | - | Surface Mount | 10-uMAX-EP |
Frequently Asked Questions
What are LED Drivers components used for?
LED Drivers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right LED Drivers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find LED Drivers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
