Hot Swap Controllers
Review Hot Swap Controllers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Number of Channels | Internal Switch(s) | Applications | Features | Programmable Features | Voltage - Supply | Current - Output (Max) | Operating Temperature | Grade | Qualification | Current - Supply | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TPS2398DMT7GIC HOT SWAP CTRLR -48V 8MSOP |
4,409 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Hot Swap Controller | 1 | No | -48V | Latched Fault, UVLO | Current Limit, Fault Timeout, Slew Rate | -80V ~ -36V | - | -40°C ~ 85°C | - | - | 310 µA | Surface Mount | 8-MSOP |
|
|
TPS2399DMT7GIC HOT SWAP CTRLR -48V 8MSOP |
3,818 |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | Hot Swap Controller | 1 | No | -48V | Auto Retry, UVLO | Current Limit, Fault Timeout, Slew Rate | -80V ~ -36V | - | -40°C ~ 85°C | - | - | 310 µA | Surface Mount | 8-MSOP |
|
|
TPS2398DMT7GTPS2398 - (-36V TO -80V) HOT SWA |
6,000 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
TPS2399DMT7GTPS2399 - HOT SWAP CONTROLLER WI |
3,000 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
NCP81428MNTXGHOT SWAP SMART FUSE WITH PMBUS |
4,769 |
|
Datasheet | - | 32-LFQFN Exposed Pad | Tape & Reel (TR) | Active | Hot Swap Controller | 1 | Yes | General Purpose | Auto Retry, Fault Timeout, Latched Fault, OVP, PMBus, UVLO | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | 5V ~ 18V | 80A | -40°C ~ 125°C (TA) | - | - | 9.5 mA | Surface Mount | 32-LQFN (5x5) |
|
|
SIS5102QP1HT1GIC SMART HOTPLUG HI SIDE 12PLLP |
3,980 |
|
Datasheet | - | - | Tape & Reel (TR) | Obsolete | - | - | - | General Purpose | - | - | - | - | - | - | - | - | - | - |
|
NIS5102QP1HT1GIC HOT SWAP CTRLR GP 12PLLP |
1,335 |
|
Datasheet | SMART HotPlug™ | 12-DFN Exposed Pad | Tape & Reel (TR) | Obsolete | Hot Swap Controller | 1 | Yes | General Purpose | Latched Fault, Thermal Limit | Current Limit, Fault Timeout, OVP, UVLO | 9V ~ 18V | 10A | -40°C ~ 175°C | - | - | - | Surface Mount | 12-PLLP (9x9) |
|
|
NIS5102QP2HT1GIC HOT SWAP CTRLR GP 12PLLP |
4,342 |
|
Datasheet | SMART HotPlug™ | 12-DFN Exposed Pad | Tape & Reel (TR) | Obsolete | Hot Swap Controller | 1 | Yes | General Purpose | Auto Retry, Thermal Limit | Current Limit, Fault Timeout, OVP, UVLO | 9V ~ 18V | 10A | -40°C ~ 175°C | - | - | - | Surface Mount | 12-PLLP (9x9) |
|
|
NIS5102QP1HT1IC HOT SWAP CTRLR GP 12PLLP |
4,704 |
|
Datasheet | SMART HotPlug™ | 12-DFN Exposed Pad | Tape & Reel (TR) | Obsolete | Hot Swap Controller | 1 | Yes | General Purpose | Latched Fault, Thermal Limit | Current Limit, Fault Timeout, OVP, UVLO | 9V ~ 18V | 10A | -40°C ~ 175°C | - | - | - | Surface Mount | 12-PLLP (9x9) |
|
|
NIS5102QP2HT1IC HOT SWAP CTRLR GP 12PLLP |
1,493 |
|
Datasheet | SMART HotPlug™ | 12-DFN Exposed Pad | Tape & Reel (TR) | Obsolete | Hot Swap Controller | 1 | Yes | General Purpose | Auto Retry, Thermal Limit | Current Limit, Fault Timeout, OVP, UVLO | 9V ~ 18V | 10A | -40°C ~ 175°C | - | - | - | Surface Mount | 12-PLLP (9x9) |
Frequently Asked Questions
What are Hot Swap Controllers components used for?
Hot Swap Controllers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Hot Swap Controllers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Hot Swap Controllers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
