Hot Swap Controllers
Review Hot Swap Controllers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Number of Channels | Internal Switch(s) | Applications | Features | Programmable Features | Voltage - Supply | Current - Output (Max) | Operating Temperature | Grade | Qualification | Current - Supply | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX15091AETI+IC CTRLR HOTSWAP 2.7V-18V 28TQFN |
105 |
|
Datasheet | - | 28-WFQFN Exposed Pad | Tube | Active | Hot Swap Controller | 1 | Yes | General Purpose | Auto Retry, Thermal Limit | Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | 2.7V ~ 18V | 9A | -40°C ~ 85°C | - | - | 400 µA | Surface Mount | 28-TQFN (5x5) |
|
MAX4370ESA+TIC HOT SWAP CTRLR GP 8SOIC |
2,500 |
|
Datasheet | DualSpeed/BiLevel™ | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Hot Swap Controller | 1 | No | General Purpose | Latched Fault, OVP, UVLO | Circuit Breaker, Current Limit, Fault Timeout | 2.7V ~ 13.2V | - | -40°C ~ 85°C | - | - | 600 µA | Surface Mount | 8-SOIC |
|
|
MAX5932ESA+TIC HOT SWAP CTRLR GP 8SOIC |
2,000 |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Hot Swap Controller | 1 | No | General Purpose | Latched Fault | Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | 9V ~ 80V | - | -40°C ~ 85°C | - | - | 1.4 mA | Surface Mount | 8-SOIC |
|
|
MAX15091ETI+IC HOT SWAP CTRLR GP 28TQFN |
490 |
|
Datasheet | - | 28-WFQFN Exposed Pad | Tray | Active | Hot Swap Controller | 1 | Yes | General Purpose | Auto Retry, Thermal Limit | Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | 2.7V ~ 18V | 9A | -40°C ~ 85°C | - | - | 400 µA | Surface Mount | 28-TQFN (5x5) |
|
MAX5955BEEE+IC HOT SWAP CTRLR GP 16QSOP |
511 |
|
Datasheet | VariableSpeed/BiLevel™ | 16-SSOP (0.154", 3.90mm Width) | Tube | Active | Hot Swap Controller, Monitor | 2 | No | General Purpose | Latched Fault, OVP, UVLO | Circuit Breaker, Current Limit, Fault Timeout | 1V ~ 13.2V | - | -40°C ~ 85°C | - | - | 1.2 mA | Surface Mount | 16-QSOP |
|
MAX15090BEWI+TIC HOT SWAP CTRLR GP 28WLP |
1,627 |
|
Datasheet | VariableSpeed/BiLevel™ | 28-WFBGA, WLBGA | Tape & Reel (TR) | Active | Hot Swap Controller | 1 | Yes | General Purpose | Latched Fault, Thermal Limit | Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | 2.7V ~ 18V | 12A | -40°C ~ 85°C | - | - | 500 µA | Surface Mount | 28-WLP (2.07x3.53) |
|
MAX5927ETJ+IC HOT-SWAP CTRLR QUAD 32-TQFN |
2,255 |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX5954LETX+IC HOT PLUG CTRLR PCI EXP 36TQFN |
1,101 |
|
Datasheet | - | 36-WFQFN Exposed Pad | Tube | Active | Hot Plug Controller | 3 | Both | PCI Express® | Latched Fault, OVP, SMBus, Thermal Limit, UVLO | Current Limit, Fault Timeout | 3V ~ 3.6V, 10.8V ~ 13.2V | - | -40°C ~ 85°C | - | - | - | Surface Mount | 36-TQFN (6x6) |
|
|
MAX15095DGFC+6A HOTSWAP |
1,742 |
|
Datasheet | - | 12-UFQFN | Strip | Active | Hot Swap Controller | 1 | Yes | General Purpose | Auto Retry, Fault Timeout, Latched Fault | Circuit Breaker, Current Limit, Fault Timeout, OVP, Slew Rate, UVLO | 2.7V ~ 18V | 7.2A | -40°C ~ 105°C | - | - | 590 µA | Surface Mount | 12-FC2QFN (2.5x2.5) |
|
MAX5901LAEUTHOT-SWAP CONTROLLER |
3,094 |
|
Datasheet | Simple Swapper™ | SOT-23-6 | Bulk | Active | Hot Swap Controller | 1 | Yes | Networking | Auto Retry, Fault Timeout, Latched Fault, Thermal Limit, UVLO | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, Slew Rate, UVLO | -9V ~ -100V | - | -40°C ~ 85°C (TA) | - | - | 500 µA | Surface Mount | SOT-23-6 |
Frequently Asked Questions
What are Hot Swap Controllers components used for?
Hot Swap Controllers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Hot Swap Controllers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Hot Swap Controllers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
