Hot Swap Controllers
Review Hot Swap Controllers Power Management (PMIC) components in this filtered selection. Compare manufacturer information, availability, pricing, datasheets and key specifications to narrow down suitable parts for your application.
If the exact part or specification you need is not listed, send the manufacturer part number, target parameters and quantity to JIEXIN Electronics for sourcing and quotation support.
| Photo | Mfr. Part # | Availability | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Number of Channels | Internal Switch(s) | Applications | Features | Programmable Features | Voltage - Supply | Current - Output (Max) | Operating Temperature | Grade | Qualification | Current - Supply | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC4252-2CMS#PBFNEGATIVE VOLTAGE HOT SWAP CONTRO |
1,286 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | -48V | Auto Retry | Current Limit, Fault Timeout, OVP, UVLO | -48V | - | 0°C ~ 70°C | - | - | 800 µA | Surface Mount | 10-MSOP |
|
LTC4253CGN#PBFNEGATIVE 48V HOT SWAP WITH SEQUE |
972 |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Hot Swap Controller, Sequencer | 1 | No | -48V | Latched Fault | Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO | -48V | - | 0°C ~ 70°C | - | - | 800 µA | Surface Mount | 16-SSOP |
|
LTC4229IG#PBFIDEAL DIODE AND HOT SWAP CONTROL |
894 |
|
Datasheet | - | 24-SSOP (0.209", 5.30mm Width) | Bulk | Active | Hot Swap Controller, OR Controller | 1 | No | General Purpose | OVP, UVLO | Auto Retry, Current Limit, Fault Timeout, Latched Fault | 2.9V ~ 18V | - | -40°C ~ 85°C | - | - | 2 mA | Surface Mount | 24-SSOP |
|
LTC4225CUFD-1#PBFANALOG CIRCUIT, CMOS, PQCC24 |
681 |
|
Datasheet | - | 24-WFQFN Exposed Pad | Bulk | Active | Hot Swap Controller, OR Controller | 2 | No | General Purpose | Latched Fault, UVLO | Current Limit, Fault Timeout, Slew Rate | 2.9V ~ 18V | - | 0°C ~ 70°C | - | - | 2.8 mA | Surface Mount | 24-QFN (4x5) |
|
LTC4260CSW#TRPBFPOSITIVE HIGH VOLTAGE HOT SWAP C |
469 |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Bulk | Active | Hot Swap Controller, Monitor | 1 | No | General Purpose | I2C | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO | 8.5V ~ 80V | - | 0°C ~ 70°C | - | - | 2 mA | Surface Mount | 24-SOIC |
|
LTC4261IUFD#PBFNEGATIVE VOLTAGE HOT SWAP CONTRO |
314 |
|
Datasheet | - | 24-WFQFN Exposed Pad | Bulk | Active | Hot Swap Controller, Monitor | 1 | No | -48V | I2C | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO | -48V | - | -40°C ~ 85°C | - | - | 2 mA | Surface Mount | 24-QFN (4x5) |
|
LTC1421IG-2.5#PBFHOT SWAP CONTROLLER |
523 |
|
Datasheet | - | 24-SSOP (0.209", 5.30mm Width) | Bulk | Active | Hot Swap Controller | 2 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 12V | - | -40°C ~ 85°C | - | - | 1.5 mA | Surface Mount | 24-SSOP |
|
LTC4251-1CS6#TRPBFLTC4251 - NEGATIVE 48V HOT SWAP |
1,971 |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Bulk | Obsolete | Hot Swap Controller | 1 | Both | -48V | Latched Fault, OVP, UVLO | Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO | -36V ~ -72V | - | 0°C ~ 70°C | - | - | 800 µA | Surface Mount | TSOT-23-6 |
|
|
LTC4216IMS#PBFULTRALOW VOLTAGE HOT SWAP CONTRO |
450 |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | General Purpose | Latched Fault, UVLO | Current Limit, Fault Timeout | 2.3V ~ 6V | - | -40°C ~ 85°C | - | - | 1.6 mA | Surface Mount | 10-MSOP |
|
LT4250HCN8#PBFNEGATIVE 48V HOT SWAP CONTROLLER |
500 |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Hot Swap Controller | 1 | No | -48V | Fault Timeout | Current Limit, Latched Fault, OVP, UVLO | -80V ~ 18V | - | 0°C ~ 70°C | - | - | 1.6 mA | Through Hole | 8-PDIP |
Frequently Asked Questions
What are Hot Swap Controllers components used for?
Hot Swap Controllers components are used in a wide range of electronic equipment and systems. Their exact function depends on the device, circuit design and technical requirements of the application.
How do I choose the right Hot Swap Controllers part?
Compare the manufacturer part number, key specifications, package type, operating conditions, availability and datasheet information. For replacement projects, always verify the critical electrical and mechanical parameters before selecting an alternative.
Can JIEXIN Electronics help source obsolete or hard-to-find Hot Swap Controllers parts?
Yes. Send us the required manufacturer part number, quantity or BOM. Our sourcing team can help check stock availability, lead time, alternative sourcing options and quotation details.
How can I request pricing and availability?
Submit the part number, manufacturer and required quantity through our RFQ form. JIEXIN Electronics will review your request and provide available stock, pricing and sourcing information.
